Reviews

Fits: YAMAHA FZ1 14 FZS10E Radiator Hose, YAMAHA FZ1 14 FZS10EC Radiator Hose, YAMAHA FZ1 14 FZS10ECW Radiator Hose, YAMAHA FZ1 14 FZS10EW Radiator Hose, YAMAHA FZ1 13 FZS10D Radiator Hose
There was nothing particularly wrong with the old part structurally but it did look in bad shape with the colouring of the metal etc. Time for a new one. Finding the right oil pipe was easy by checking the Yamaha schematics. The oil pipe itself is a good size but that is not really reflected in the price, very good value for money in my books. I did have a couple of other parts in my order for this bike and got them all shipped as one and saved a few pounds too. The shipping took 5 days and all my order was intact and perfect. The pipe does come in the standard Yamaha packet and was surrounded with bubble wrap. As this is an oil pipe it needs to take a bit of heat and with the quality of this pipe, I know they do last. Unfortunately after 15 years of UK road grime and grit, the metal has taken a beating and needed changing. This new pipe is fantastic. Perfect. Not really much else I can say about this as there were no issues in the oil pipe or in fitting it. Looks a lot better than the old pipe which did by miles. Very pleased. View Detail

Fits: YAMAHA FZ1 14 FZS10EW Radiator Hose, YAMAHA FZ1 14 FZS10ECW Radiator Hose, YAMAHA FZ1 14 FZS10EC Radiator Hose, YAMAHA FZ1 14 FZS10E Radiator Hose, YAMAHA FZ1 07 FZS10WC Radiator Hose
There was an issue with a coolant leak on the 2008 FZ1N which needed addressing. It was found to be the thermostat which was the fault. Specifically the thermostat housing which was warped by heat which caused a leak. I found the right part by using the Yamaha schematics and then searching Webike to make sure this was available with it being an older bike. Luckily, this could be ordered. The price was exceptional and the shipping cost was also great. With a couple of other parts in my order, I got them all shipped together using EMS. In as little as 5 days, my order arrived. All the parts were professionally packaged and there was no damage to anything in the box. The thermostat assy came in the Yamaha box but it was also wrapped well with additional packaging. Not a lot I can fault about any of the quality on this thermostat assy. It is well made, the housing is an ABS plastic I presume. Hard wearing and very sturdy. I double checked the bolts on either side of the housing were torqued correctly before installing. Apart from the awkwardness in situating the thermoset, everything went well. N leaks, no problems, very happy with the purchase. Thanks Webike. View Detail

Fits: YAMAHA FZ8 13 FZ8ND Radiator Hose, YAMAHA FZ1 13 FZS10DC Radiator Hose, YAMAHA FZ1 13 FZS10D Radiator Hose, YAMAHA FZ1 14 FZS10EW Radiator Hose, YAMAHA FZ1 14 FZS10ECW Radiator Hose
There was nothing particularly wrong with the old part structurally but it did look in bad shape with the colouring of the rubber etc. Time for a new one. Finding the right hose was easy by checking the Yamaha schematics. The hose 4 itself is a good size but that is not really reflected in the price, very good value for money in my books. I did have a couple of other parts in my order for this bike and got them all shipped as one and saved a few pounds too. The shipping took 5 days and all my order was intact and perfect. The pipe does come in the standard Yamaha packet and was surrounded with bubble wrap. As this is a hose it needs to take a bit of heat from the radiator coolant and with the quality of this hose, I know they do last. Unfortunately after 17 years of UK road grime and grit, the rubber hose has taken a beating and needed changing. This new hose is fantastic. Perfect. Not really much else I can say about this as there were no issues in the hose or in fitting it. Looks a lot better than the old hose which did by miles. Very pleased. View Detail

Fits: YAMAHA FZ1 07 S, YAMAHA FZ1 06 S, YAMAHA FZ1 16 S, YAMAHA FZ1 15 S, YAMAHA FZ1 14 S
This was a part I wanted to get for the FZ1N 2008. When I got the bike, it did not have any protection for the radiator and these are expensive to replace. I have used R&G many times before for just this part as they are great. Finding the right one for this FZ1N was not hard as I just checked R&G website and that gives you all the alternative for options on this bike. The guard from R&G was pretty good and was a little cheaper than I could source locally. With a couple of other smaller parts already in my basket, I got them all shipped via EMS together to save on a bit of shipping. EMS got my order to me in perfect condition in 5 days. The radiator guard came in the R&G box and had all the accessories I needed to fit to the bike. I have to say, a long time ago, I did have a radiator guard from R&G and the paint finish did not last too long but by the looks of this new one now, they have improved the paint finish tremendously. This has a nice shiny but kind of matt finish. The mesh in the grill is small enough to not let any big rocks or stones through which is great in my opinion. Yes, I could have got a different radiator guard from another brand but I do trust R&G nowadays. Fitted easily enough but take your time and you will be fine. The overall is excellent and really hides the radiator nicely. Very pleased and so is the bike. Thanks Webike. View Detail

Fits: YAMAHA MT09 20-21 MT09LB Water Pump, YAMAHA MT09 20-21 MT09LB Water Pump, YAMAHA MT09 20-21 MT09LCB Water Pump, YAMAHA MT09 20-21 MT09LCB Water Pump, YAMAHA MT09 20-21 MT09LCGY Water Pump
Yet another part I ordered for the rebuild of the water pipe and oil pipe on the FZ1 2008. These were to connect the water pipes to the metal pipe work. I found the right size parts from simply cross referencing with Yamaha schematics from the internet. The clamps were really good value and were actually in the sale at the time. I had a lot of small parts for this rebuild even though I was swapping out just a couple of pipes. Do not reuse old clamps where ever possible, especially if these clamps are almost 20 years old. For how much they cost, do yourself a favour and buy new. So, with all the parts I needed, I got them shipped using EMS who get my orders to me fast. This was also the case with this order. In 5 days from being shipped the order arrived in perfect condition. The clips were in the standard Yamaha packets and were inside a padded envelope too. The clips are the ones that you need to use pliers or similar tool to squeeze together the tangs and the clip opens out to slide onto the pipe. Simple to use. The clips are very well made and the metal is perfectly formed. As these are not the type you tighten with a screw, they are even more robust in nature. Fitted perfectly and the job was completed in record time. Very pleased with this purchase and all the other new parts for this old girl. Happy customer right here. View Detail

Fits: YAMAHA FJR1300 POLICE (FJR13PMW) 21 Radiator & Hose, YAMAHA FJR1300 POLICE (FJR13PLW) 20 Radiator & Hose, YAMAHA FJR1300 POLICE (FJR13PKW) 19 Radiator Hose, YAMAHA YZFR6S (YZFR6SYCL) 09 Water Pump, YAMAHA YZFR6S (YZFR6SYCL) 09 Radiator Hose
This was another part of the water pipe and oil pipe rebuild on the 2008 FZ1 due to surface corrosion and just looking bad. I found the right size clamps by checking on Yamaha schematics for this model of bike. The hose clamps are nothing too special but why pay cheap for non OEM clamps when these are going to be so much better. There were a few other parts I needed for this rebuild so I got them all shipped together to save on a little shipping costs. EMS is my chosen couirier and my order arrived undamaged in 5 days from being shipped. The hose clamps came in the Yamaha packaging and put in the same bubble wrapped envelope as some gaskets and oil seals to keep them safe from damage. The hose clamps are well made, the threads on the screw are silky smooth and the entire clamp comes together really easily. No notchiness or problems in tightening. Top quality parts from a top quality company. Great work Yamaha and thank you Webike for the hard work. View Detail

Fits: YAMAHA R1 03 YZFR1RC-F Water Pump, YAMAHA FZ1 02 FZS1000P Water Pump, YAMAHA FZ1 02 FZS1000PC Water Pump, YAMAHA YZF-R1 02 YZFR1P Water Pump, YAMAHA YZF-R1 02 YZFR1PC Water Pump
This was one of the O-Rings that needed to be changed when I was rebuilding the waterpump pipes and hoses. There is no point in buying new hoses and pipes if you are going to reuse the old o-rings. Finding the right o-ring for this particular area was super easy as I just use the Yamaha schematics. The cost that Webike had these for was really good value and as I already had some other parts for this rebuild, I got them all shipped together to save time and money. EMS is who I use as my chosen courier and the order was delivered in 5 days from being shipped. The o-ring came in the standard Yamaha packet and was inside a larger bag with smaller parts inside to keep the together and safe. The o-ring is not really much to look at but it is an important one. The specification for the size and thickness is very important too and this o-ring was precise and well made. There is enough flex to not bee too hard to fit but is pretty robust. One more step forward in the rebuild. Very happy customer. Thanks Webike. View Detail

Fits: YAMAHA XSR700 (XSR700MCW) 21 Water Pump, YAMAHA XSR700 (XSR700MW) 21 Water Pump, YAMAHA YFZ-R1 (YZFR1WC) 07 Radiator Hose, YAMAHA YFZ-R1 (YZFR1WC) 07 Water Pump, YAMAHA YZFR1 (YZFR1ECGY) 14 Radiator Hose
These o-rings were also part of the water pump rebuild on the 2008 FZ1 which needed attention due to the age related parts not looking great. Finding the right O-Rings was sumple as I already had the Yamaha schematics for the water pump open. There are 2 of these same o-rings but have different item mnumbers although they are the same part number. With the other parts in my order for the rebuild, I had EMS ship them al toghter to save on shipping costs. The entire order arrived in perfect condition and well packaged in 5 days. Th o-rings were individually packaged in their own Yamaha pouch. They are flexible but also strong as they do need to be. Never any doubt when it comes to Genuine Yamaha parts. They are well within the specifications for the o-rings and time to continue the rebuild to get this bike back on the road. Thanks for the hard work you do Webike, much appreciated. View Detail

Fits: YAMAHA YFZ-R1 (YZFR1WC) 07 Water Pump, YAMAHA FZ8 13 FZ8NDC Water Pump, YAMAHA FZ8 13 FZ8ND Water Pump, YAMAHA FZ1 13 FZS10DC Water Pump, YAMAHA FZ1 13 FZS10D Water Pump
This was yet another part that is for the rebuild of the FZ1 2008 which was looking a bit tired with the almost 20 year old OEM parts. Although they were not particularly damaged, they made the bike look older than it is so new ones are essential. Finding the right hose was easy as I already had the Yamaha schematics for the previous pipes and hoses needed. The cost from Webike was great and far better than I could source locally. With the other parts I need for this rebuild in the same order, I saved a little on the shipping too which also helped. Via EMS my order was delivered in 5 days from shipping and was very well packaged and padded out so no damage was incurred. The hose 5 is a smaller diameter hose than the previous hose 1 I also purchased but it is also an inner braided hose as it needs to be robust and strong. The original bend fits perfectly with the pipes and along witht he clips I also purchased, the rebuild is cvoming along nicely. Thanks Webike, great job guys. View Detail

Fits: YAMAHA FZS1 (FZS10FGY) 15 Water Pump, YAMAHA YFZ-R1 (YZFR1WC) 07 Water Pump, YAMAHA FZS1 (FZS10FCGY) 15 Water Pump, YAMAHA FZ-1 (FZS10V) 06 Water Pump, YAMAHA FZ-1 CA (FZS10VC) 06 Water Pump
This is another part of the pipe and hose rebuild for the FZ1 which was looking a little tired with old parts. This one was the hose 1 which attaches to the pipe 1 I also have in this order. I found the right hose by using the Yamaha schematics and searching through Webike website. The pipe was very good value for money and a lot cheaper than could be sourced locally. With all the other parts for this rebuild in my order, I had them all shipped together via EMS and the order arrived undamaged in 5 days. The packaging for this order was perfect and very well padded out to stop any issues. This hose 1 is a internally braided hose as it does need to be very strong and robust for the purpose needed. It is well made and is the perfect diamter as needed for the job in hand. Not really much I can say about this pipe 1 but standard Yamaha quality throughout. Can't beat that for peace of mind. Thanks Webike. View Detail