KITACO Power Supply Harness
if you buying this adapter to add the heated grips or 12v plug DO NOT BUY it ! this wiring harness is not for the USA model of the bike. you will need to run additional wires from the battery or tap t...
KITACO is a brand that releases a wide variety of items mainly of 4MINI parts. They release many products essential for exhaust gasket and others of almost all vehicles.
if you buying this adapter to add the heated grips or 12v plug DO NOT BUY it ! this wiring harness is not for the USA model of the bike. you will need to run additional wires from the battery or tap t...
To replace all the Knock Pins when installing the Bore Up Kit into the DAX.PurchasedI don't have a Parts List, so it was a hassle to find out the OEMParts No.I chose this product because it has a comp...
It is inexpensive, but the accuracy is good and the quality of the plating is fine. There is no sense of existence than I thought in a good sense after installation. The point that I want to improve o...
My old Gasket was not this soft. In fact, SEA BASSOEM had no problem at all even if I took it off and put it back on 5 or 6 times.The size is also RG250 γ adaptation, but it is off by a few millimeter...
It has a little torque up at low speed. In the high rpm range, it has become to extend pleasantly. The sound quality is crisp sound. It is Monaca Exhaust System, but the appearance is not bad.
I bought this one with Slit in it for 20,000 although I still had enough left in the tank to service the rear brake on my GRAND AXIS that I used to commute to work. The brake is very hard to use for t...
I bought this product at another shop, but it is a KITACO product and I like its quality and shape. It has more parts than other company's products, so please take your time to read the instruction ma...
Ninja250R Initial Model has a special Blinker Bracket.It is difficult to install the Blinker of Other Brand Product.Most of the UniversalBlinkers have a 10mm screw diameter.Blinker Bracket for Ninja25...
Even though it's High Solo, it doesn't make it harder to ride, in fact, it's easier to open the throttle because I don't have to regrip it.
I used it to get power from the Grom.It will be a very useful product when you take out from Coupler and Battery respectively.It is easy for beginners to work with.
The front has been replaced to match the rear, how does it work? That is my honest opinion.I think it's getting better. (Lol)I'm more than happy with the way it looks than it works.
It looks Black and cool.I wanted to change the color of MONKEY125 Custom to Yellow and Black, so I chose it.I wasn't too sure if it was effective, but the same MONKEY125 fellow It's a little nimble to...
I think that this is a small but elaborate reproduction of Crankshaft. Because it is cute and Compact, it is not bulky and does not get in the way even if you put it in the pocket of Pants. I think it...
I bought a used APE 100Normal engine that I purchased for maintenance.Initially, I purchased only the lower waist version because I didn't want to open the upper waist, but I wanted to understand the ...
With HondaEngine, there is a lot of information available on the Net, but you may not be able to find the parts you want to know or the key figures you need to know.In that regard, although it is divi...
I installed it on my SUPER CUB C50!The Clear Lens itself is very good and installation is not a problem, but I attached it to the Rear Box because there is no place to attach it to the included Reflec...
I use it for the prevention of the theft of Silencer of Exhaust System just in case. There is no feeling of attachment at all, but on the contrary, it is not conspicuous and it is good.
The Smart Key Case protects your Damage firmly. The worry of the loss and the damage is gone.
The CROSS CUBJA45 is not a Wedge base, so it's a bit of a pain in the ass to install it 。Mr. WeMotorcycle, there are a lot of parts that don't fit your vehicle, please check more.
……I don't care about the performance and fee-ring, it's just for self-satisfaction. The black color of the threaded part is scraped off by UNUT. I'm worried about Rust, so I applied Grease on it;
Tolles sehr hochwertiges Produkt. Sehr zu empfehlen. Es passt sofort und erleichtert die Arbeit erheblich. Ich würde es jederzeit gerne wieder kaufen.
Great very high quality product. Highly recomm...
Ordered the item to remove exhaust sidestand springs . Colour RED. Quality is fantastic. The angle hook is perfect. Tool is easy to use. Highly recommended item.
Quantity:1 Set of 10pcs. is a good amount to keep in stock for maintenance. Once removed, it is not difficult to reuse, but it is used for the Castle Nut, which must not be loosened, so I always put a...
To remove the Snap ring, this is out of the question without it.If someone is trying to remove the Snap ring at random with some kind of haphazard tool, I would tell them to stop because it's a wasted...
I purchased this for use when changing oil.The scale makes it easy to measure the right amount.In addition, the spout is thin and easy to pour.It also comes with a Cap so your Oil won't drip when you'...
You can drive safely by managing the torque in the essential and indispensable suspension and detachment of the wheel. It is a solid quality in a size that is easy to use.
【good point】An easy-to-use 4-liter jug.Motorcycle Oil is Large body and this size is just right.[Bad point]nothing special[Summary]If you use a jug when you change the oil, it will be less likely to s...
【good point】The tool itself is well made and made the Valve Spring Compression a breeze.[Bad point]None in particular[Summary]If you need to remove and install the Valve Spring, this is a tool you'll ...
If you drop a Bolt or Nut in a tight spot, the magnet makes it easy to pick it up when it's out of reach. It can be changed into any shape and is very effective.
I bought this product to see how much oil I need to change, which seems to have a good reputation.It seems to be a bit hard in terms of material and seems to deteriorate and crack quickly. This is a g...
Whenever I ride a Motorcycle, I always use the Fender Eliminator.I decided on KITACO because the Grom Helmet holder is hard to use.I like the design there.
On all the Motorcycles I've ridden recently, I've always put a Helmet holder in this position.So I bought and installed it on the for GPZ900R again.The CB400SB was the same, but with a motorcycle with...
Basically, I put the Helmet under the Seat, but if you go shopping or something, this holder is very useful.It was easy to installIt may not be a good idea to leave the Helmet attached to the Holder.
I was able to easily install and remove it from both the Jet and AGB Full face types of Bell and AGB with one touch. Apart from being a bit heavy, it's well worth buying.
It is easy to install and fits perfectly because it is only for ADV150This motorcycle has a small Helmet in, so it's hard to store the Helmet since things tend to happenThe Helmet holder is very usefu...
The helmet holder is in the Rear Sets, but to be honest, it is difficult to use, so I bought it It wasIt takes a little bit of effort to support it because it is sandwiched between the Frame and Tande...
In the GSX250R and NINJA, you can remove the Tandem seat and use the Seat lock It's a way of securing a helmetIn Touring and so on, you can't use it if you put a Back on it, it's going to be a Large w...
Matching CB250R for printing (MC52) is the CBR205RR in the photo (MC51) You will see and feel uneasyI don't know how it feels to install it as I haven't installed it yet, but it will be installed as p...
The Helmet holder on the back of the OEM Seat is completely uselessI'd love to see this one adopted as an OEMIt opens from the top when you unlock itNot applicable, but I have it on my MT-03
I'm using it on my MONKEY125 (OEM is too deep because it's assumed to use auxiliary wire)Clutch lever attached to the side, because the Handlebar Lock cuts to Left It's a hindrance, but it's also a ha...
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING