SP TAKEGAWA (Special Parts TAKEGAWA) lineups a number of big bore kit and customization parts mainly for 4MINI motorcycle like APE, MONKEY and GORILLA. Extremely popular because of its good performance and quality
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
* About quality and texture, Die-cast aluminium clutch housing with a black painted finish to suit the Grom engine but the silver clutch cover and oil filter cover do standout and that was 1 of the ma...
About quality and texture: I am happy with the quality of the clutch lifter plate, made from cast aluminium it is light in weight and strong enough to use with the light clutch springs.
About the fee...
About quality and texture: I am happy with the quality of this 5 speed transmission kit, crankcase gaskets are included and the finish of the hardened steel parts is as good if not better then the Hon...
About quality and texture: I am happy with the quality of this crankshaft kit, the crankshaft is reinforced and the forged connecting rod is designed for maximum strength while remaining light in weig...
About quality and texture The quality is much better than the standard
About the feeling of use There are so many functional parts that I'm really satisfied with
Products to buy together an engine o...
About quality and texture have a good overall finish
About the feeling of use be bright in color
Products to buy together If you want it to be brighter, I recommend LED...
About quality and texture The quality of the product is not bad
About the feeling of use But after using it, I couldn't show the performance that I was thinking of
Products to buy together Big Cabra...
New seal. Perfect. Support very good.
I will buy again. Super fast delivery.
I hope it will work well. Thank you so much!!!
I bought it because Seat is hot in the summer.I have not used it yet but I think it is good.
After installation, I did a day-touring trip of about 500 km.(*CROSSCUB110, replaced by Seat of JA45.)Having previously used a similar product made by Komine, I leave you with my comparative impressio...
 |  | |
| | | |
| |  |  |
| | | |
 |  |  |
| | | |
| |  |  |
| | | |
| |  | |
| | | |
| | |  |
| | | |
 |  | |
| | | |
There were comments that the Light was dark and difficult to see, but it worked fine for outdoor work during the daytime.
* About quality and texture, A steel spring clamp with a goldish in colour corrosion resistant coating, not silver in colour like the Webike picture.
* About the feeling of use, These hose clamps s...
I could do without it.I don't care if there is.I can make adjustments without worrying about injury.
About quality and texture - Excellent quality, no issue with the O-ring.
About the feeling of use - Great fit and functioning as intended.
Products to buy together - Purchased together with ball bea...
About quality and texture - Excellent quality bearing from SP Takegawa, nice smooth operation.
About the feeling of use - Perfet fit into the clutch cover housing and quite in use.
Products to buy t...
About quality and texture - Excellent quality, no issue with the O-ring.
About the feeling of use - Zero oil leaks from the clutch access cover, so it is doing its job.
Products to buy together - Ad...
About quality and texture - Excellent quality, no issue with the O-ring.
About the feeling of use - Zero oil leaks from the oil filter cover, so it is doing its job.
Products to buy together - Add o...
The pin is short and the holder is at an angle, making it difficult to apply force and work.When incorporating Mr. Takekawa's parts, the Manufacturer listed them as tools, but…
About quality and texture - Excellent quality, the holder has a solid feel and looks like it will last my lifetime.
About the feeling of use - Works really well, did a great job stopping the motorcy...
These 15.5 millimeter in diameter hose clamps are used with the 12 millimeter hose, both being from Special Parts Takegawa. Webike have these priced very well considering they are a four piece packet....
 | |  |
| | | |
 |  |  |
| | | |
It's smaller than what I had initially expected but I enjoy it very much nonetheless. It's great if you want to clear out your pockets and get at most 2 small bags of groceries. I like how it looks a ...
It is easy to install by simply wrapping the belt around the car. Unfortunately, the double-sided tape on the body side does not adhere well to the texturing side of the tape. Therefore, I use only Be...
I installed it on a c125.C125 is a graceful design of the first SUPER CUBC100 Seagull Handlebar There is a beautiful Handlebar Line with a Motif of "1" and this is my favorite.The Smartphone Holder on...
배송이 빠르고 제품이 너무 만족스럽습니다.
저는 위바이크에서 정말 많은 제품을 주문했습니다.
하지만 이런 질좋고 상태 좋은 제품은 정말 믿을만 합니다....
This is a perfect size bag for Monkey. This bag is not waterproof, but it is not a problem for me. The three separate pockets are also very useful.
I had ordered a SIDEBack base made by SP Takekawa for my MONKEY125 (unfortunately, the end of January next year = Manufacturer).I bought it as the best solution to it (the fit is listed on the Manufac...
I bought it so that I can rehydrate quickly when I take a break during touring.I attached it to the webbing section on the SIDE of my REBEL 250 OEMSaddle Bag.It was easy to install, the texture of the...
I like it.
Takegawa pc20 cav air funnel.
This is the best what i bought parts of dream50 ac15 cb50v products....
In the summer heat and slightly forward leaning SR, the BackpackStyle makes my back steamy, so I consider buying a bag without a backpack.It's not a Side Back, which is a style of bag that is permanen...
Installation takes about 20 minutes.Without the 2mm Hexagonal Wrench, the bar cannot be fixed.No compatriots have been.The 2mm Screw is difficult to tighten, so you may want to temporarily attach it o...
 | ||
| |
The installation was easy, the texture is good, and I am satisfied with the Large change.
The instruction manual is not very clear and the price is a little high.
I was looking for a retrofit helmet lock that I could mount on my Inch handle.It was hard to find and I finally found this product.Installation itself is easy because you only need to tighten the scre...
Originally it had a KIJIMA made one, but when I removed the Billionfootpeg, I was concerned about it sticking out in the ▼ shape, so I replaced it with a Takekawa.The Racing hook on the Babyface inter...
I bought a KIJIMA Helmet lock and installed it on the Tandem Footpeg and used it for a while, but the lock was too low for my use.It's not that KIJIMA Helmet lock is bad. The quality is good and it is...
 | ||
| |
Fashion costs. Style you have it or you don't. Wearing this Takegawa t-shirt you've got STYLE and FASHION without the cost! As Iv'e come to expect from Takegawa they have chosen a quality product to a...
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
About our "Mybike" service 
![SP TAKEGAWA [Replacement] Clutch Lifter Plate](https://global-fs.webike-cdn.net/uiu/impression/202208/13_1021816_62f74ec4a4c00_M.jpg)
![SP TAKEGAWA Crankshaft Kit [X-Beam Connecting Rod Strengthened Type]](https://global-fs.webike-cdn.net/uiu/impression/202208/12_1021805_62f5ea322f53c_M.jpg)
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING