Model Number: S-1 [Components] Right and left set [Material] Carbide aluminum magnesium
* The image is only for reference. The image shown may differ from the actual product.
The material used is magnesium carbide aluminum. As much as possible, it is processed to reduce the weight while maintaining the strength. The position of the fingers is outside of the stock position, which reduces the fatigue common to short levers. The RALLY490 is now synonymous with short levers.
★Are you put off just because it's a short lever? The rally lever is only one ball short of the stock lever. It's a small thing, but it's easier to operate than the stock one, and it reduces the damage when you fall.
The short lever allows you to install handguards (bar end fixed type) which cannot be installed with the stock lever, and improves protection.
★Why Short Lever? Why does RALLY insist on short lever?This is because RALLY short levers combine the advantages of short levers with the advantages of long levers, while overcoming the disadvantages of each. The advantage of the long lever is that it is easier to operate the clutch because the fingers are placed outside the lever. However, there are some disadvantages, such as the handguard cannot be attached, or the handguard is easily broken when falling. The RALLY lever is designed so that the position of the fingers on the inside of the lever, which is the biggest disadvantage of short levers, is on the outside of the lever compared to stock short levers. The operation is comparable to that of a long lever. In addition, the shortness of the short lever, which is its greatest advantage, makes it easier to install the handguard and minimizes the possibility of damage in case of a fall. For those who insist on long levers, the 492 series is also available. Considering all these factors, the answer to the choice of the lever will be obvious.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I bought it because it said it was compatible with DJEBEL250, so I thought it would also be compatible with XC, but the shape did not fit and I could not install it. I contacted them in a panic to return it, but they asked me to send them a picture of the defective fit. I took a picture of the re-installation and sent it to them, but they could not return it... (-_-;) Please check carefully for incompatibility and be careful when purchasing.View Detail
[How is it used? Installed on TS125R. Application:Off-road Used for about 6 years. Many times overturned.
Was the one you received as per Image? As shown in the image. Since my hands are so small, I needed a lever position adjustment mechanism and a short lever to attach the hand guard.
Was the installation difficult? The installation is not difficult, but it does require some tools and some adjustment of the clutch. However, since the lever replacement is an introductory step for Custom, if you are well informed, prepared, and have the tools, you will be ready for any battle.
How was your experience with it? As it is a trail bike, I thought I would install something from a manufacturer specializing in off-road. (Brake Side) was good, but it felt slippery because of the mud. The Clutch Side felt good, with no hand fatigue, even during Situations that required a lot of half-clutching. There were no problems with the Brake Side, and the results were excellent. After installing this, I regretted that ZETA's Pivot lever was better for Parenthesis. I regretted it. However, I gave up on it because it doesn't fit on the Brake Side. Also, I have small hands. (Glove sizeM) It is often hard to find a good OEM lever, but this product has a good lever position. (Brake Side) In addition, it is possible to adjust the position for firm operation. If you have a small hand and you are not comfortable with the operation, we recommend that you introduce a short and lever position adjustable product including this product.
[Included Parts:were they on? None
[Was there anything that disappointed you? None
Point and hang of installation Glasses Wrench in Size8 or 10 (Spanner) Is Quantity:You need to be prepared because you will need 2pc. After installation, lubricate the clutch lever with grease. (Lithium, Urea, Siliconetc.) However, by applying a thin layer, dust adhesion can be kept to a minimum. If you don't like dust sticking to your fish, you can apply dry lube such as Kure's Dry fast lube, WAKOS' Bidas Dry, etc. on a regular basis. For off-road driving, dry rubs may be a better choice. However, it does not last very long, so you will need to reapply after driving in the rain.View Detail
I bought this as a spare for my wife's motorcycle. It is much easier to grip than the OEM and my wife noticed the difference. I think I'll use this for my motorcycle too.View Detail
I really wanted a Foldable with a play adjustment Lever, but I didn't think so It was expensive and not a compatible car I chose this one as the only one that fits and is cheap and reputable because cheap similar products have too bad a reputation The result is Large Satisfaction It fits exactly, and it's not strangely padded or foldable, so it's not rigid The Touch is very good, and the OEMLever has two fingers that can catch the outside finger when it is covered with two fingers It was Stress to feel, but that's almost gone (Although depending on how it's pulled, it can hit the ball.) Since you will be putting your fingers on the outside of the Lever, you won't feel much of a difference in weight You can recommend it with a score of 100View Detail
【What made you decide the purchase?】 There was only a short lever for DF 200 DJEBEL. 【How was it actually used?】 Personally I prefer Short, so it's not bad. There is no such thing as getting much better. 【Was it difficult to install? (Hard parts case)】 Depending on the year, it does not fit, so Small processing is required. It's not that difficult. 【Please tell me the point of installation and hang (in the case of Hard parts)】 Since it is not difficult, there is no particular point like Point or hang.
[Is there anything I was disappointed about?] Points that do not fit depending on the year. I arrived by Small processing, but if possible we want ALL MODEL to be aligned so that there is no need for processing. 【Hope for Manufacturer - Please tell me if there are any improvement points】 Minor I am happy that there are more variations in car parts as well. 【Have you compared items?】 I can not compare because there is no other Short lever. [Others]View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!