*Warning: Never use Golden and Hyper Sintered pads on cast iron rotors! *The year is not the year model announced by the manufacturer, but the year when it was first sold. *The stock pad has the same shape, but the thickness of the friction material is various.The life of the pad differs depending on the thickness of the friction material, even if the wear resistance of the material is the same as that of the standard pad.Also, the service life of the brake varies depending on the frequency of use. *Calipers (piston movement, etc.) and disc rotors (wear, mirroring, oil, coating from previously used pads, etc.) may prevent the original performance from being fully realized.Maintenance of related parts is also important. *There may be changes in product specifications due to the manufacturer's reasons.
* The item may be temporarily out of stock due to manufacturer shortages.
A commitment to durability. Perfect for the needs of general driving durability. The emphasis is on durability and comfort in general driving rather than performance in hard driving.
■Long-life pads The wear resistance of the sintered metal pad has been further refined and the wear resistance has been improved by about 10% compared to the Golden Pad.
■Hard to wear = Hard to wear out pads Since the pads are less worn, brake dust is less likely to be produced and the wheels are less likely to become dirty.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I changed my 88 Honda Bros front brakes with these. Excellent grip for a decent price. I would recommend it.About quality and texture: ExcellentAbout the feeling of use: My brakes became more responsive.Products to buy together: With Nissin Master Brake CylinderDifficulty of installation: I had a mechanic install it.Cost performance and comparison with other products: Decently priced.About shipping and packaging: Quick when in stock.Any concerns, cautions, or advice when purchasing: NoneView Detail
I used this product for Rear brake of '90 CBR400RR (NC29).
I replaced DAYTONAGolden PadX which I used for about 25,000km because it was less than 2mm remaining. I made it here because Dust comes out a lot.
When I opened the Package, I couldn't help but laugh at the thickness of the Pad. I finished the work by myself, but it is the thickness which cannot be inserted very much without pushing Caliper piston tightly. The finish is like ordinary Brake Pads, and there is nothing to be noted, but I was able to install it without a problem in Caliper.
Finish the break-in and see how it works. The Golden PadX is one grade higher than the Golden PadX. When you apply the Golden PadX, it will decelerate comfortably, but the Golden PadX is a little milder. I feel that the pad is suitable for the rear brake. Also, it took me some time to get used to the disc of my motorcycle which started to wave after running 50,000km. It's hard to reduce the amount of wear, and with my usage, I can use it for almost 30,000km.
I think this Pad is suitable for those who use Rear brake for speed control, not for main braking.View Detail
It is used for NSR's Rear Brake Pads I have a habit of using the rear brake while in a curve If you're looking for a Pad that doesn't work that well, it's cheap and not expected to work... (as you'd expect) The performance is not suitable for front brakes, but there is no problem for rear brakes? I think Life is just getting started, but some say it will be surprisingly reduced..View Detail
I installed it in Rear of Honda VTR 250. As the OEM which had been attached from the beginning reaches 11000 kilometers and it is time to replace, Rear does not require braking force in particular, so there was no dissatisfaction, so the same etc. We chose this product with a high discount rate and low price, claiming its effectiveness. I did it for myself for the first time, but I could install it without problems in particular. Pin (Pad pin gently polished with Brass Brush) Grease up, apply PadGrease to the back of Body, chamfer Pad, also clean Piston with Nylon brush, apply Silicon grease and rub it out. In test there is no squeal, at the beginning naturally Atari has not appeared, so it will not work, but after running a few kilograms of Brake you came to work well. I feel that there is more braking power than OEM.
I hope that durability is as good as it is.View Detail
Previously, I used Red Pad both before and after Brake. But Red Pad is a lot of Brake dust and Dust around Rear comes to Large quantity makes maintenance a pain.
Therefore, it changed to Sintered pad which is long lasting and is likely to reduce the amount of dust As before, Front emphasizes Control with Red Pad Rear emphasizes durability with Hyper Sintered Pads I am using it like using, but I can use it without feeling uncomfortable.
It was enough braking force for me because I could lock it and steal Slide if stepping on Pedal firmly.
Afterwards, expectation for durability. It would be nice to use Front Exchange 2nd time.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!