[Product Contents]
Meter Body x 1pc.
Power Supply Harness x 1pc.
Ground Harness x 2pcs.
Speed Sensor Harness x 1pc.
RPM Sensor Harness x 1pc.
V-shaped Bracket x 1pc.
Bolt with Hexagonal Hole x 2pcs.
Washer x 2pcs./Bullet Type Terminal CA104 x 1pc.
Hoe Type Terminal x 2pcs.
Wiring Connector x 4pcs.
It displays speed and tachometer in bulk at Φ60 meters!
It is a thin refreshing design with electric type.
It is a compact body with a depth of 43mm, and Φ60 electric digital meter with neoclassic spherical lens specification matches a variety of genres.
It is possible to display speedometer & tachometer, and bar graph tachometer.
The vehicle speed signal can be picked up from a OEM electric speedometer (0V-5V alternating pulse signal from the vehicle speed sensor), and a OEM mechanical speedometer (requires a separate display speedometer conversion adaptor).
The rotation signal corresponds to the vehicle equipped with the DC 12-volt battery of the full & amp;CDI ignition. (It is impossible to point ignition.)
[Speedometer display]
•0-399km/h(0-250mph)
*It is for electric speedometer vehicles (vehicles capable of picking up 0V-5V alternate pulse signals from the vehicle speed sensor) (Note 1)
(Note 1) It is required for a OEM speedometer to be a mechanical type (vehicle using a meter cable), a separately sold display speedometer conversion adapter (adapter to convert the shaft rotation of the OEM speedometer gear BOX into a pulse signal).
It is possible to switch display of [sub monitor display]/ODO/TRIP 1/TRIP 2/rotation number.
•Odometer (ODO): 0-99999 km (mile).
•It is a trip meter (TRIP 1/2): 0-9999.9km (mile) dual display.
•Rotational Speed Display: 0-20000rpm.
*Detectable Ignition Method: 1-rotation/1 ignition, 2-rotation/1 ignition, 1-rotation/2 ignition, 1-rotation/30 pulse output (Note 2)
*(Note 2) It is a method to use in some models of HARLEY DAVIDOSN.
[Bar Graph Display] It displays rotational speed as a bar graph.
• Display maximum: 4500-20000rpm (upper limit can be set arbitrarily between 4500-20000 (500 units))
*This product is the initial configuration of each of the vehicle speed sensor, ignition system setting, bar graph displays the maximum setting for the first time in the rev counter operates correctly. Please use it performs an input in the initial setting items of the instruction manual.
[*Non-correspondence Condition*]
1. The voltage at idle speed is stable and does not come out more than 9V DC vehicle.
2. 6V Battery Vehicle. (12V Electric Conversion Vehicle, Battery-less Vehicle is also not usable.)
3. AC 12V Vehicle. APE100/50 (Battery-less Vehicle) , XR100M/50M, MONKEY R/RT/BAJA and etc.
4. The vehicle speed signal to the power supply, ignition signal, if you have a lot of noise and the waveform is often a disturbance in the vehicle.
5. It is if you can not pick Up the 0V-5V alternating pulse signal from the vehicle speed sensor of OEM electric speedometer, such as the vehicle model-specific exclusive circuit is employed. (Example: Shadow System All models are not ready for a unique signal 0V-5V-12V.)
6. To control the motorcycle in a OEM meter UNIT), removal of the circuit is built-in or the power supply to the vehicle speed sensor, if the supply was cut-off. 7. Mechanical speedometer mounted in the OEM, but the vehicle is not mounting opening of meter cable.
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING