rigid type Shape: IH-550D [Size] ・Vertical adjustment range: 110-147mm ・Left and right adjustment range: 55-85mm ・Thickness 6-18mm Handle Diameter: Φ22-Φ29 Compatible with iPhone 11 / Xs / XsMax / XR / SE2 / X / 8 / 7 / 6s / 6s Plus
*If a phone case is attached, the phone may not fit. *The smartphone in the image is not a Daytona product. *Some models may not be compatible due to their shape or specifications, even if they are within the specified dimensions. In addition, the position of the power button, camera, speaker, earphone jack varies depending on the model, so it may be necessary to install them in a condition that interferes with their use.Please check with us before you leave. *Adjustment of the operating parts of the product, reassembly of the parts, installation on the bike, and installation of the model are all at the user's risk. *DAYTONA is not responsible for any damage or loss of parts at the adjustment or reassembly points, or any malfunction (failure, breakage, water damage, dropout, theft, etc.) or accidental damage that may occur to this product or the model installed on this product. *Not recommended to be used with the slide arm fully extended. Vibration may cause the arm to break.Daytona will not be held responsible for any damage. *The lock may unintentionally come off depending on the degree of impact that occurs when going over bumps on the road surface, regardless of whether the road is paved or unpaved. All measures against running vibration and measures to prevent dropping of this product, its components, and installed models must be taken at the user's risk. *This product and its components are made of metal and resin.Even if the environment in which the product is used is not a factor, deterioration of the material (including rust) due to aging and wear and tear may result in unexpected problems such as breakage of parts or accidental damage. Check the condition of the product every time before using it on the road (pay particular attention to the adjustment operating parts, fixing parts, and parts where rainwater tends to accumulate), and if there is any abnormality, replace the product with a new one (parts or products) as appropriate. *There may be changes in product specifications due to the manufacturer's reasons.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.
Daytona original specification of Minoura iH-220 / 520 (body center screw fastening type). The upper side of the body is extended by about 12mm and the long center pad increases the seating surface of the model. Specially equipped with small wing lock and release button for easy one-handed operation, pivoting clamp with carabiner hole and silicone band clasp. Attach the clamp to the handlebar by screwing it with a tool.
I chose this product because the most important Handlebar Clamp Parts are made of Gold and it is a reliable brand. It seems to be a collaboration with a certain manufacturer of holders or OEM products, and including them, various fixing methods can be selected. I clamped it to a handlebar, and it is fixed firmly as I expected and I can use it with confidence. The new design is a good example of this. I use it to mount my iPhone 11, but the Holder's fixing parts just hit the SIDEButton, so I reinstalled the Holder upside down to avoid contact with the parts and prevent it from malfunctioning when driving. The only thing is that when using the iPhone, the vibration of the Motorcycle or Engine, which is the cause of the failure of the phone, is transmitted almost directly to the iPhone, so I am thinking of taking some countermeasures again. Inexpensive, cheap, chintzy Material:It's a solidly built product, far more solidly built than Plastic's Holder!View Detail
I have used many kinds of SMART phone holders in the past, but this SMART phone holder is the easiest to use and the most durable. I have been using it every time I go touring for 2.5 years now and it has not broken down at all. It's a great product! I recommend it.View Detail
I think this is an excellent holder in terms of texture and hold.
This is Quantity:Pair (for Left and Right) It is fixed with a variable portion of
The top and bottom are the type that are fixed with screws before installation.
Finally, fix it with the silicon band.
I've been using it for about 3 years and it has never fallen when I'm using it correctly.
This one has two parts (LargeSmall) to support the bottom side of the phone, but the Small one may break during use. (My friend broke his.)
This part has been processed in such a way that it may have reduced the strength of the part.
I've installed it on several motorcycles, and I don't know if it's the product, the location, or the vehicle, but sometimes it's noisy due to vibration.
There are parts of any product that are not good or hit or miss, so in general, I am satisfied with this product.
[Usage] This is a must-have product for using your smartphone as Navigation in Touring. I can't see it while I'm driving, but I can listen to the voice guidance while it's charging, powered by my motorcycle, so I don't have to worry about running out of battery. Attaching and removing the phone is a bit of a hassle, but not too much. The charging cord can be connected without any problem.
[Is what you received as Image? The product arrived exactly as described. The clamp is compatible with Φ22 to Φ29, so it can be attached to Taper Handlebar.
[Try it. There is no visible vibration, so you can check the display even by glancing at it. However, I do plan to purchase the Seismic Spacer that is scheduled to be released. I pinch it with the SIDEHook, but I'm worried about it falling, so I pinch it hard. I'm worried that the plastic SIDEHook will get tired and break. The silicon band, which is supposed to prevent the device from being dropped, should be a little tighter as insurance.
(Points to note) Two types of SIDEHooks and two heights are available for a total of four different thicknesses, so you can check the thickness of the phone you are installing and choose the SIDEHook that best suits your needs.:Let's set it. Adjust the height adjustment slide arm so that it is also Exactly in between. Rigid type may be somewhat more theft-proof.
Comparison with other products There are products that allow you to attach and detach your phone with One-touch, but the difficulty is that you can't choose the Smartphone CaseDesign since it is a dedicated Case. It is also good that this holder can be used even if you change your phone. Quantity the phone:It can also be used to hold the charging cord when it is not set.
I think it would be better if the direction of rotation could be easily done. It seems a bit expensive for a product.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!