[Material] Stainless steel [Components] ・Right side body x 1 pc ・Left side body x 1 pc ・Flange x 2 pcs ・Flange Spring x 4 pcs ・Mounting bolt and nut (8mm x 25mm) x 2 sets ・Stand part bolt nut (8mm x 45mm) x 1set ・Bracket with bush x 2 in a set ・Installation Instructions
*The graph shows the power curve by chassis dynamo. *This is the body only.
* The image is only for reference. The image shown may differ from the actual product.
Introducing T2 Racing Twin Steel Chamber for MC18.
This is a [STREET]. This model is designed specifically for the MC18 with many chamber configurations in mind.
This is more suitable for street use than [RACE] Type-2 which is based on T2 Racing's chamber. Several types of prototype chambers is made for the street and repeatedly tested them on the dynamometer to create the [STREET], The graphs in the photos were measured on a vehicle with the stock engine limiter removed. it's the engine holding 65.4 horsepower and 4.3 kilos with its peak speed of over 11,000 rpm.
In addition, the flange is improved, the flange spring is strengthened and a bracket is added from [RACE] Type 1.
For the chamber body bracket, you will need to use a special bracket instead of the chamber bushings that are installed in the stock frame. The right side is fixed from the bolt under the step plate and the left side is fixed from the side stand mounting bolt. It is designed to be as close to the swingarm and frame as possible to prevent the chamber body from rubbing at full bank and to minimize contact with the under cowl.
The chamber characteristics are also easy to handle for all riders. No carburetor setting required with bolt-on design!
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
The support is cracked, I just installed it after 500km…There was never fall down and no accident.I think the welding is too weak.And I don't know how to apply for after service because I don't have any information about this brand.I can fix it myself, but I'm just going to buy another product.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!