Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
*Because it reacts to ultraviolet rays, the effect of UV processing shield becomes less effective. *The color change of the shield depends on the usage and weather conditions. *This product can be used for almost all full-face helmets, but there are some visors and shields which are not suitable for installation. *Mounting on silicone-based treated shields, bubble shields, or vented shields may cause interference. *When used at night, the reflective effect may be perceived as slightly increased. It is also not suitable for use on roads with continuous tunnel entries and exits. *The luminous intensity depends on the degree of sunlight and the degree of UV processing of the shield. *The light intensity will stabilize in two days after use. *Replacement is recommended every year. *Image includes other products.
Shield lens with light sensitive function that changes the intensity of the lens depending on the intensity of sunlight. A laminated structure is created by attaching this product to a helmet to equalize temperature difference between inside and outside of a helmet and prevent fogging of a view through a shield. Also anti-fog treated. From touring to racing, from amateurs to top riders, experience the most powerful lens that is trusted by all. Easy to install, just stick it on the back of the shield.
[instruction manual for PROGRIP 3000LS LENS] This innovative lens, after being attached to the shield of a helmet, enhances the total performance of the shield in various conditions with different fog and sunshine conditions. Please read the following instructions carefully before attaching the 3000LS to the shield.
■Preparation Please choose a cool, dry and dust-free place for installation. With the shield of the helmet lowered, apply the masking tape along the opening of the shield (see the figure on the package). When the shield is removed, the exact mounting location of the 3000LS lens will be noted. Remove the shield from the helmet. Clean and dry the shield according to the manufacturer's instructions. Please make sure that there are no fingerprints, oil stains or water droplets on the shield. For cleaning shields with a silicone surface treatment, we recommend a petroleum-based plastic cleaner (without silicates) to improve the adhesion of 3000LS. Please install the 3000LS lens after cleaning and drying the shield.
■Installation 1. Remove the protection film from both sides of the lens. Be careful not to get fingerprints or smudges on the lens. Remove the protection film from the adhesive gaskets on the sides and around the lens. 2. Hold both ends of the lens and slowly curve the lens into a U-shape with the side with the double-sided tape facing the inside of the shield.(See diagram on package) 3. Once the lens is attached, make sure it is set in the correct place, and gently apply force to the entire area around the lens. If the sticking position has shifted, gently lift up the misaligned position and gently apply force again. 4. After the lens has been placed in the correct position, firmly apply pressure to the entire area around the lens to ensure that the adhesive gasket is firmly attached. Please allow 24 hours before attaching the shield to the helmet again in order to make the lens stick to the shield more firmly. 5. 3000LS lens may interfere with a braid depending on a position of a shield base of a helmet when a shield is attached to a helmet. Please check if you can open and close the shield without any problem while adjusting the shield base to avoid interference.
■Maintenance Residual dirt on the lens can be removed by using a glass cleaning agent. Do not use abrasives or corrosive cleaning agents.
Points of Attention
* The helmets sold on this site are based on the Japanese safety standard. We are not responsible for accidents, damage, injury, or any other related matters as a result of purchasing this product.
Recently viewed products
Ratings & reviews for this product or related products
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!