Front Pipe
Product # G261-65-200
126.44 EUR (20,700 JPY)
List price: 126.44 EUR Save 0%
+207 Webike point (1.26 EUR)
If manufacturer have in stock, |
Ships around 3rd Apr. 2024? |
Ask Webike for next delivery date |
Product # G261-65-200
126.44 EUR (20,700 JPY)
List price: 126.44 EUR Save 0%
+207 Webike point (1.26 EUR)
If manufacturer have in stock, |
Ships around 3rd Apr. 2024? |
Ask Webike for next delivery date |
Model Page Links
Webike seems to be the only website that sells aftermarket stainless exhausts that will be compatible with American XT250s, and it is an absolutely beautiful exhaust at that. My OEM exhaust had the bottom rusted out, and this stainless exhaust was a welcomed upgrade. Not only is it cheaper than an OEM Yamaha exhaust, it looks much prettier and seems to be a better quality. The American OEM heatshield fit perfectly with minimal modifications - all that was required was to use one of the vent holes as a bolt hole, simple as that. A larger bolt was also used to plug the O2 sensor hole on this pipe, as the American XTs don't use an O2 sensor. I couldn't be happier with this product.View Detail
Webike seems to be the only website that sells aftermarket stainless exhausts that will be compatible with American XT250s, and it is an absolutely beautiful exhaust at that. My OEM exhaust had the bottom rusted out, and this stainless exhaust was a welcomed upgrade. Not only is it cheaper than an OEM Yamaha exhaust, it looks much prettier and seems to be a better quality. The American OEM heatshield fit perfectly with minimal modifications - all that was required was to use one of the vent holes as a bolt hole, simple as that. A larger bolt was also used to plug the O2 sensor hole on this pipe, as the American XTs don't use an O2 sensor. I couldn't be happier with this product. View Detail
This is a great exhaust header pipe for the 2015 XT250, I am sure will last the life of the bike. This pipe is high grade stainless, almost non-magnetic. The OEM was steel and rusted in 3 years until it broke off at the engine, Yamaha should have made it stainless, and I did not want to buy another OEM pipe. This stainless pipe was also less expensive than the OEM one.There are 2 small differences between this Japan (Serow) model and the OEM for Canada/USA XT250 models:1. The mounting for the heat shield is slightly different. The Japan model has a one-piece single long heat shield that uses 3 mounting screws, while the Canada/USA model uses 2 separate shields with 4 screws. If you can do some metal working, the main front shield can be modified to fit easily. Or else there are many after market heat shields that can work, or even wrap it with exhaust wrap tape. The fancy fix would be to buy a Japan model heat shield, but they are not easy to find.2. Japan model header pipe comes with a port for an O2 sensor, which I think is M18x1.5 threads. Canada/USA XT250 does not have or use an O2 sensor. The port should be able to be plugged with a short bolt, or else cut short and welded closed. Cutting it short will also allow the Canada/USA front heat shield to fit with less modification.Even with the bit of modification needed, I am very happy that I could buy this pipe, it fixes the poor quality OEM problem. I am also very happy that Web!ke had this part, I could not find it anywhere else in the whole world, and Web!ke was great to buy from and great price. I will never be afraid to buy parts here, they have some quality things I can't get anywhere else.View Detail
I installed it on a SEROW 2020 Final Edition.
At the same time, I changed to Full Exhaust System including Silencer.
By the way, Silencer is a planus.
I chose this product because it's just so cheap!
It's cheap, but you can rest assured that Beams has a reputation for quality and accuracy.
I was able to choose. (Beams products have been purchased in the past.)
It was very accurate and easy to install.
It came with a non-OEM Gasket, but we didn't use it.
I prepared it separately. The installation point is to install the Normal exhaust pipe before removing it.
Remove the Seat and Right Side Cover, and remove the O2SensorHarness' Remove the Connector and free
The O2SensorBody must be set to Otherwise, the O2SensorBody cannot be removed.
Installed Nut, Quantity:Pair (for Left and Right) After adjusting the swing angle of the
The area where the Silencer joins with the Frame is the narrow part of the Frame.
and the interval is the Quantity:Pair (for Left and Right) It seems that the best position is in the uniform etc. (If it's closer to either, Frame
Thread compound is applied to the Bolt and Nut to prevent sticking.
It does not interfere with the OEM AluminumUnder Guard. After installation, we recommend using Parts cleaner to clean the parts.
I wiped it down. It's my first run and it's a nice, clean burn and nice color.
We have not experienced any dramatic changes in the engine feeling after the replacement, but we are concerned about the rust. but
I am satisfied with Large because it is gone and looks cooler.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
Please select option before add to your cart.
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.