■Stock air cleaner box specification [Specification] ・Inner diameter: Φ28 Carburetor pitch:68-67-68 Spigot outer diameter (mm):28mm ・Spigot total length(mm):27mm
*It is strongly recommended to replace the stock tank band when installing. *The stock insulator band can be used, but replacement is recommended.
*[Parts required separately] ・408cc fuel tank (must be replaced if using a 398cc tank to ensure flow) ・Fuel tank fixing rubber (8mm or more rubber mat is required at the rear of the tank)
*You will need one of the following fuel cocks. ・High flow cock made by Siohaus ・PINGEL high flow cock + adapter for CB400F (408) (Since the high flow cock and the choke lever interfere with each other, it is necessary to modify each cock so that the choke lever does not interfere.) ・Racing Throttle Holder Set with Switch for TMR Small Body (Wiring modification is necessary for general use.)
*For low type handles, the standard switch box can be used by using the following parts. ・Throttle grip inner pipe (for TMR small body) (Part No: 671-320-0000) ・Nut M6 (Part No: 821-006-1000) (*Split nut processing required) ・Throttle wire (both OPEN and CLOSE) must be replaced with one 50-100mm longer than the stock throttle wire for the low type handlebar
*[Equivalents of the following] ・Throttle wire (for CB400F raised handle, OPEN) (HONDA Stock Part No: 17910-333-4052) ・Throttle wire (for CB400F raised handle, CLOSE) (HONDA Stock Part No: 17920-377-710)
*[Parts recommended separately] ・CB400FOUR (408cc: 74-77 / 398cc: 76-77) Machine Bent Straight Cyclone (Part No: 110-441-4640) Universal oil catch tank set (Part number:535-000-x000) ・Carbon carburetor heat guard sheet set (Part No: 541-001-0000) ・Insulator band (NORMA: 40-60) (Part No: 855-209-4060)
*These parts were confirmed to be installed by Yoshimura Japan during development.If the manufacturer's stock parts have been discontinued, please prepare the appropriate parts.
*The image may contain other types. *There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
* This item can not be cancelled, returned nor exchange after placing an order.
CB400FOUR(408cc:74-77/398cc:76-77) TMR-MJN28 carburetor, a product where Yoshimura's technology and dedication are applied throughout.
[Features] ・TMR-MJN (Multiple Jet Nozzle) The carburetor of this CB400FOUR engine is the large diameter Φ28. In addition, the MJN provides the ideal atomized gasoline supply for the severe accelerator work in the extremely low opening range required by large diameter carburetors, and has achieved a setting that is mild, easy to open, and safe to run even with a stock engine.
・Special spigot The Yoshimura TMR-MJN carburetor is designed with a spigot length that allows the carburetor body to be placed as close to the engine as possible in order to shorten the intake pipe length. This CB400FOUR carburetor is also newly designed with very short spigot for better throttle response and higher power output at high rpm.
・Pitch for CB400FOUR This carburetor is specially designed for compact CB400FOUR engine with very narrow carburetor pitch. For this purpose, each existing TMR carburetor is disassembled, checked and adjusted by experienced Yoshimura mechanics, and assembled by hand.
・Body Design TMR's unique round shape of the high performance flat valve racing carburetor does not spoil the atmosphere of the standard CB400FOUR and gives it a casual presence. ・MJN Top Cover (Red) ・Aluminum drain bolt (red) ・Exclusive emblem for Yoshimura TMR-MJN
■Stock air cleaner box specification It is possible to install TMR-MJN in the stock air cleaner box. The special black anodized sand casting adapter is designed with a special passage that allows only clean air that has passed through the air cleaner to enter the pilot system passage as well as the main bore.This allows you to experience the high performance of a racing carburetor while reducing the risk of inhaling suspended particles.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!