Nice finish and colour perfection as per discription. Only will vibrate as e joins to the mirrors are not firm enough. But well blend wit nice out looks to the handle
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Nice finish and colour perfection as per discription. Only will vibrate as e joins to the mirrors are not firm enough. But well blend wit nice out looks to the handle
Fits: KAWASAKI VULCAN400 II, KAWASAKI VULCAN400 , KAWASAKI ELIMINATOR250 V, KAWASAKI ELIMINATOR125 , KAWASAKI 250TR
Looked fantastic on my maxam and worked perfectly. This wants me to have 100 characters but its a cheap part and it works so i don't feel i need to go in depth. Anyway, I would buy it again for another scooter.View Detail
I bought it because it seemed to be easy to adjust the Mirror angle.
In conclusion, Quantity:Pair (for Left and Right) The visibility at the rear is not so good.
The Mirror is flat, so it is not distorted.
However, the range is narrow and the angle adjustment is delicate (it is difficult to reach the itchy angle), and it is not easy to adjust the angle.
It is possible to adjust the height and angle of the bracket, but it is difficult to get it to the expected angle because it turns during tightening.
If you loosen it up a bit, it will move while driving, so you need to give up some of it.
The quality is poor, worth the price.
The details are BALIBALIED and I remember it being slightly rusty.
I just gave it a terrible review, but I like it because I wanted a product that could rotate the entire Mirror.View Detail
It was planned to be installed in the M109R, but it was not sent off, it was not accepted.
The reason for No. 1 is that the backward visibility is (As expected) To Hi speed Crew Jin is too narrow
unsuitable.
Secondly, if the texture of Plating goes into the field of view simultaneously with other Plating parts
Balance is bad for sure.
However, there is something firmer than the price when attached, Parenthesis good
If it is Small Type car model "Yes" I think.View Detail
Fits: KAWASAKI VULCAN400 CLASSIC, SUZUKI INTRUDER400 , SUZUKI INTRUDER1500 LC, SUZUKI INTRUDER400 CLASSIC, SUZUKI DESPERADO X
Blurring while driving is intense. It is very brittle because of Material.
I locked it down in Wrench and I could bend down, the bars broke
The second is where the range of motion is narrow. Because my height is about 180, if you lean forward a bit, you will not be able to fulfill the role of Mirror.
Because it is cheap, it can not be helpedView Detail
It's cheap!
Style is outstanding!
Surprisingly the back looks better.
However, due to Reasonable, rust came out immediately as to whether plating was weak or whether Aluminum's material was bad.
Because the price is cheap, I was prepared for honesty to become such a state, but I felt a little disappointing because it was too early!
In my case, it was a rust premise so after rusting I'm going to paint it to my favorite Color!
I purchased it for Plating and enjoyed the Plating state for a while, then make it my favorite color etc etc etc etc etc etc etc etc etc etc. I think that purchase is preferable as prepared!View Detail
Installation takes only 15 minutes only. Easy and no special tools required. A small product made for great easy shifting better. Smoother shifting og gears and even made shifting from gear one to neutral are easier and smoother when without the product made it hard to neutral. After installing, gear shifting felt comfortable and lesser cracking sounds when forcing into neutral or gearing up and down.View Detail
Great traction of the dry Clutch plates. Better boost of clutch and power delivered. Installation takes about 30minutesView Detail
Fits: SUZUKI Gixxer NG48G-100001-, HONDA SUPER CUB 50(FI) AA09, HONDA GROM JC61-1000001-, HONDA GROM JC75-1300001-, HONDA GROM JC61-1300001-
Easy installation than took only 10minutes. Removal of the side top fairings are required. No spark plug cap included so either you reuse the original cap or use other types of cap and as for me, I used NGK cap. Both combination was great! Instantly you can feel the sound much better with the idling more stable. Smoother feeling of riding n power felt. Smooth engine ticking.View Detail
Fits: HONDA MSX125 (GROM) 13-15, HONDA MSX125 (GROM) 13-15 (MSX125)
Easy simple and effective. Reused the rubber washer from the original cap cover. Screw in and that's it. Temperature shows precisely of the heat from the engine. Great product for bikes with no temp gauge!View Detail
One of the best belting performance by Josho which combination with Josho variator set. Giving more durablities. Performance and quieter engine from the crankcase. View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING