24.54 EUR
(4,000 JPY)
20.12 EUR
(3,280 JPY)
(18% OFF)
4 (36 Reviews)
Excellent
DaytonaVề chất lượng và kết cấu rất phù hợpVề trải nghiệm sử dụng tốtVề kiểu dáng thiết kế đẹpVề bảng đo size vừaGiá thành và so với các sản phẩm khác ko đắt lắmVề vận chuyển và đóng gói kĩMọi lời khuyên hoặc lưu ý khi mua hàng
Reviews For DAYTONA Maintenance Roller Stand From Other Webike User
Excellent
Enough for chain cleaning/adjustment and rear wheel washing.This type of roller stand has been around for a long time, but the weight is a little heavy and the rubber cushion on the back of the stand is
They were all peeled off with a single blow.
The body of the DAYTONA model is light and the position of the rollers can be easily changed according to the engine displacement volume of the motorcycle.
You can use from Mini bike to Liter machine.
I used to have a J-TRIP Stand for Beginner, but it took up a lot of space when not in use.
It gets progressively more difficult to clean up.
It's easy to store and it doesn't take up much space if you lay it down after use.
For example, when you put the rear wheel on the roller stand, you should put it slightly left of the center.
Let's aim at it and put it on at once.
After installing the front brake lever, tie the front brake lever with rubber or anything else to lock it.
When you turn the rear tire, the tire will shift to the right, so it is better to put the tire on the left.
I think it's easy to work with.View Detail
Excellent
Easier to use than I thought.I bought this for ChainMaintenance on my VTR250.
Maybe it's because the car is on the lighter side, but I didn't have to put that much effort into turning the Tire to get it to turn.
Body is the weight that can be held with one hand, and it is the impression that it is possible to put in and out easily because the place where it puts it is not troubled that much.
When you adjust the width of the Roller and Roller, you can remove it by pushing in the protruding part of the Roller, but I was able to remove it easily without putting any effort.
I worked with it on a flat Concrete and it didn't shift position.
To be honest, I didn't expect so much before using it, but it was more convenient and easy to handle than I expected. But if you have a large or heavy motorcycle, it may not be as stable as you expect.View Detail
Average
It takes more strength than you think to turn it.I bought a similar Roller stand at a certain cheap tool store and it did not turn by hand at all.
I trusted Brand and bought this one.
It's a 900cc motorcycle, but it takes more power to turn the tire than I expected. It is much better than the thing of the cheap tool store, but ChainMaintenance is quite Large strange. It seems to be inevitable with this type.
If you have a place to store it, it's much better to buy a Maintenance Stand. It's for people who don't have storage space.View Detail
Terrible
Not suitable for heavy vehicles and vehicles with large tire contact area.* The video is a recent driving scene with my car FZr1000 3GM5.
[How is it used?
Cleaning and maintenance of wheel.
Was the one you received as per Image?
It was as per Image.
How was your experience with it?
As shown in the title, it is not suitable for heavy vehicles and vehicles with large ground contact area of tire.
[Points to note]
Even if you use it, I think it is up to 250cc class weight car body.
How did it compare to other products?
Chain lubrication, etc., is not necessary for a heavy body. Swingarm Lift Stand is better to use.
It can only be used for cleaning the wheel.
Other items that would be helpful
Installation Point or hang/It is better to lay a square of about 3 cm in STAND.
Items to buy together/Square timber.
Opinions and requests to Manufacturer/It should be indicated that it is difficult to use for chain lubrication of the rear wheel.View Detail
Most Viewed Reviews Of DAYTONA Other Maintenance Stands
Excellent
Enough for chain cleaning/adjustment and rear wheel washing.This type of roller stand has been around for a long time, but the weight is a little heavy and the rubber cushion on the back of the stand is
They were all peeled off with a single blow.
The body of the DAYTONA model is light and the position of the rollers can be easily changed according to the engine displacement volume of the motorcycle.
You can use from Mini bike to Liter machine.
I used to have a J-TRIP Stand for Beginner, but it took up a lot of space when not in use.
It gets progressively more difficult to clean up.
It's easy to store and it doesn't take up much space if you lay it down after use.
For example, when you put the rear wheel on the roller stand, you should put it slightly left of the center.
Let's aim at it and put it on at once.
After installing the front brake lever, tie the front brake lever with rubber or anything else to lock it.
When you turn the rear tire, the tire will shift to the right, so it is better to put the tire on the left.
I think it's easy to work with.View Detail
Excellent
Easier to use than I thought.I bought this for ChainMaintenance on my VTR250.
Maybe it's because the car is on the lighter side, but I didn't have to put that much effort into turning the Tire to get it to turn.
Body is the weight that can be held with one hand, and it is the impression that it is possible to put in and out easily because the place where it puts it is not troubled that much.
When you adjust the width of the Roller and Roller, you can remove it by pushing in the protruding part of the Roller, but I was able to remove it easily without putting any effort.
I worked with it on a flat Concrete and it didn't shift position.
To be honest, I didn't expect so much before using it, but it was more convenient and easy to handle than I expected. But if you have a large or heavy motorcycle, it may not be as stable as you expect.View Detail
Average
It takes more strength than you think to turn it.I bought a similar Roller stand at a certain cheap tool store and it did not turn by hand at all.
I trusted Brand and bought this one.
It's a 900cc motorcycle, but it takes more power to turn the tire than I expected. It is much better than the thing of the cheap tool store, but ChainMaintenance is quite Large strange. It seems to be inevitable with this type.
If you have a place to store it, it's much better to buy a Maintenance Stand. It's for people who don't have storage space.View Detail
Terrible
Not suitable for heavy vehicles and vehicles with large tire contact area.* The video is a recent driving scene with my car FZr1000 3GM5.
[How is it used?
Cleaning and maintenance of wheel.
Was the one you received as per Image?
It was as per Image.
How was your experience with it?
As shown in the title, it is not suitable for heavy vehicles and vehicles with large ground contact area of tire.
[Points to note]
Even if you use it, I think it is up to 250cc class weight car body.
How did it compare to other products?
Chain lubrication, etc., is not necessary for a heavy body. Swingarm Lift Stand is better to use.
It can only be used for cleaning the wheel.
Other items that would be helpful
Installation Point or hang/It is better to lay a square of about 3 cm in STAND.
Items to buy together/Square timber.
Opinions and requests to Manufacturer/It should be indicated that it is difficult to use for chain lubrication of the rear wheel.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING