About quality and texture, I can confirm that the quality is great and that the materials used are a mixture of carbon fiber, machined aluminum and stainless steel for the muffler and stainless steel for the pipe. About the feeling of use, The carbon fiber on the muffler looks slick against the black paint on the bike and the noise level of the exhaust is too loud for me at the higher speeds so an insert will need to be added to help generate a much more enjoyable noise level at all riding speeds. Products to buy together, There are a hugh range of carbon fiber parts for the Grom and some additional carbon fiber parts against the black paint would be ideal so adding the front and rear fenders in carbon fiber to the cart will be the first. Difficulty of installation, I can say the fitment of the exhaust system was very easy due to the small number of mounting points for the exhaust and the easy acess to these mounting points on the bike. Everything from the muffler mount to the spring retainers lined up perfectly. Cost performance and comparison with other products, The pricing of the product is high. You receive an exhaust system that is made using high quality materials and has high quality surface finishes. Plently of full exhaust systems available cheaper but this one does have a unique shaped muffler. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

I purchased this Two Brothers Racing S1r full Exhaust in Black Series Carbon for my 2016 Yamaha R3. The muffler is super light and is one of the best looking examples on the market. The installation was straight forward and I was able to put it on by myself in my garage in about two hours. The sound and performance gains have been great. A fuel tune is necessary to get full performance out of this exhaust, but it’s well worth it.View Detail

AmericanBrand's Exhaust System had narrowed down a few candidates! but I finally went with the TBR Tarmac
From my experience as an American Brand, I was prepared for a certain amount of processing and accuracy errors But I was able to install it without any trouble
The Baffle Silencer by Matsumoto EngineerRing was installed from the beginning However, it's still rather loud and powerful when you turn it
I didn't feel the torque-loss as much as I was worried about, and I could go around to the red zone without stress It was a fun motorcycle
It was a pleasant miscalculation that the fuel consumption was the same as in NORMAL at 55-60km per liter
The only thing I think is that LogoSeal is poorly made (I don't mind it, but it doesn't bother me) (A friend of mine was concerned.)
The body is Carbon or Aluminum Cut-out Bracket and It's Stainless Steel and wonderfully made, so he's extra concerned about that
For me, I was Large satisfied with the purchase
View Detail

It looks like Large change SMART than OEM lunch box
Match the color of CeramicBlack to the car body
Is it wonderful?

The sound is very explosive
I felt like I heard it in pre-purchase videos etc. Large Looks durable
I thought it, but it is a quarrel when I actually hear it

TBR made famous for explosive but this series too
It is a feeling that said it told to not miss an example

I have baffle for Japan but it's annoying
Although I hate explosion, those who want to attach this Exhaust System
It may be necessary to deviseView Detail

Since there are not many people installing it, it is good not to get cued at the touring destination. As for the performance, I can not say anything because it is not easy to put in. As a good point, it is light weight, that the style of Right Side is tightened and became fearless, almost volume so the volume is large Large Material : Because it is Stainless Steel, it has lighter sound quality than NORMAL.
Manual version can not be installed with English version because it is made in United States. It takes time to remove the Normal muffler and also to wear the Custom Exhaust also needs to get caught.View Detail

About quality and texture: I am happy with the quality of the stainless steel header pipe and satin stainless steel muffler which is finished with a unique carbon fibre end cap. About the feeling of use: Super lightweight compared to the Honda exhaust which results in a good weight saving. This muffler design is on a larger proportion for the Grom but it manages to create a big bike sound from the little 125cc motor. Products to buy together: Some form of higher flow air filter would also be desirable to purchase along side this full exhaust system, I will be going with an open air intake from Kitaco. Difficulty of installation: The process to install takes about one hour to complete. A new gasket for the forward mounting flange is recommended. Not difficult to do. Cost performance and comparison with other products: Good costing as you are receiving a well designed and manufactured product using quality materials that will help increase performance but there are also other options for much less cost, so browse Webike available exhausts if you have a lower exhaust budget. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: A JMCA approved exhaust so it is suited for everyone that needs an exhaust to my legal specifications.View Detail

About quality and texture: I am happy with the quality of the pulley holder from Kitaco made from a steel construction with a PVC coating over the band to help improve it's hold.About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts.Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the pulley holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job.Difficulty of installation: The process to install takes a few minutes, place the pulley holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do.Cost performance and comparison with other products: Good costing as this is a quality made band holder from Kitaco that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter.View Detail

About quality and texture: I am happy with the quality of the stainless steel header pipe and polished stainless steel muffler which is finished with a unique designed end cap. About the feeling of use: Super lightweight compared to the Honda exhaust which results in a good weight saving. This exhaust system design and proportions are well suited to the Grom and it manages to generate an enjoyable exhaust note from the little 125cc motor. Products to buy together: Some form of higher flow air filter would also be desirable to purchase along side this full exhaust system, I chose to go with an open air intake from Chimera. Difficulty of installation: The process to install takes about one hour to complete. A new gasket for the forward mounting flange is recommended and modification to the rearset is needed for the third generation Grom. Not difficult to do. Cost performance and comparison with other products: Good costing as you are receiving a well designed and manufactured product using quality materials that will help increase performance but there are also other options for much less cost, so browse Webike available exhausts if you have a lower exhaust budget. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: A JMCA approved exhaust so it is suited for everyone that needs an exhaust to my legal specifications.View Detail

About quality and texture: I am happy with the quality of the titanium exhaust from Over Racing. The muffler is quite compact with a removable baffle inside and made from titanium, while the exhaust piping is very large in diameter at the exhaust port end and just continues to expand all the way up to the muffler connection and is also made from titanium. About the feeling of use: The titanium exhaust is an aggressive looking exhaust on the Grom but the exhaust note is very enjoyable to hear at idle and through the entire RPM range due to the baffling within the short muffler. Products to buy together: Some form of higher flow air filter would also be desirable to purchase alongside this titanium exhaust to help achieve maximum performance. Difficulty of installation: The process to install took about one hour, I was removing an aftermarket exhaust which was very simple as it was just the two nuts at the front and one bolt at the back but the exhaust port gasket was very difficult to remove. Cost performance and comparison with other products: High costing but you are getting a full titanium exhaust system with features to help obtain high performance at a high price as compared to the much cheaper stainless steel version available from Over Racing. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Zero concerns or cautions on this product and the advice is to purchase if you have the money. View Detail

About quality and texture: I am happy with the quality of the sports camshaft from SP Takegawa, wonderful machining throughout and great quality bearings fitted. About the feeling of use: I was looking for a camshaft to make the 125cc engine higher revving which it has and I'm really happy with how it performs on the open road with no real loss of power in the lower RPMs which is ideal for around town. Products to buy together: Some type of fuel controller is needed to be purchase along side the sports camshaft, the SP Takegawa FICON 2 is well suited to this type of performance modification. Difficulty of installation: The process to install takes about half an hour, was an easy job to complete after reading through the Honda service manual directions. Not difficult to do. Cost performance and comparison with other products: High costing, the cheapest high RPM camshaft available here on Webike is the Endurance hi-power camshaft but does not look to have a power curve anywhere near as good. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Webike has many camshaft to choose from and the choice is difficult, much research is required to get as close as possible to your desired performance outcome.View Detail