About quality and texture - The spark plug cap from NGK is made from phenolic resin, silicone rubber and ceramics with a refined look, the quality from the overall fit and finish is perfect.About the feeling of use - The red finish is all that I was after. This spark plug cap has a more decorative look then the original spark plug cap and with no other noticeable performance difference when used along side the original ignition coil.Products to buy together - This product would not normally be purchased to use with the original ignition coil so the use of an upgraded ignition coil from Posh, Kitaco or SP Takegawa would be very likely.Difficulty of installation - The installation of the spark plug cap is a simple task that took 0.2 of an hour to complete. Some slight mechanical aptitude and the use of your hands is all that is required to secure the spark plug cap to the ignition coil lead.Cost performance and comparison with other products - I find the cost of all the products NGK sell to be on par when compared to what most other companies sell their products for and the spark plug cap is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the spark plug cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

Not sure if they improves performance or if its purely just a style upgrade. The plug is well made and fits the spark plug snug. The red colour just screams performance.View Detail

A direct replacement for the coil cap. Had installed together with the hyper ignition coil , which give a lively spark for the vehicle. View Detail

Well Received! Thank you so much! Well packaging! Havent test it yet but will test it once im at home. Thanks again seller!About quality and textureView Detail

About quality and textureОдин из лучших вариантов замен оригинального свечного колпачкаДанный пластиковый колпачок обладает высоким качеством изготовления, влагостойкости и надежности примыкания к электроду свечи зажиганияТакже имеет широкий штекер, для присоединения к большому колпачку свечи, а не к резьбе, как изготовлено с завода, что очень сильно влияет на прочность контакта и как следствие на качество и мощность искрообразованияAbout the feeling of useНаилучшие впечатления, колпачок имеет в комплекте 2 резинки, для очень плотного обжима свечи и высоковольтного провода, а значит туда не попадет влага даже в сильный ливень, также как я написал выше - имеется подключение к большому контакту свечи - это надежно!Products to buy togetherВ комплекте находится свечной компачок NGK и 2 резинки-манжеты, для качественного герметичного соединения с кабелем и свечойDifficulty of installationЛегкая установка, достаточно открутить стандартный колпачок и накрутить на провод этотCost performance and comparison with other productsНизкая стоимость и высокое качество, также может примениться, если ваша деталь утеряна, нет конкурентов в этой цене и товар хорош, если вам не нужен дополнительный проводAbout shipping and packagingПростая и надежная картонная упаковка, made in Japan!Any concerns, cautions, or advice when purchasingВ комплекте есть все необходимое, учтите, что данная модель используется для широкого коннектора свечиView Detail

About quality and texture - The camshaft cover from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - I was unimpressed with the overall look of the original engine covers with their plain painted finish. The transformation with the simple addition of this camshaft cover is amazing and I am more then satisfied with the new look.Products to buy together - G-Craft have many products to purchase to continue adding a more attractive appearance to the Monkey 125 engine but the first on my list are the matching valve covers to complete the engine cover upgrades on the top end of the engine.Difficulty of installation - The installation of the camshaft cover is a simple task that took 0.2 an hour to complete. Common sense and the use of basic hand tools is all that is required to transfer over the O-ring from the original cover and then secure wih the included hardware.Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for but the camshaft cover is priced higher.About shipping and packaging - With there being no cost difference between sea freight and EMS for the camshaft cover, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The round taper type air filter from K&N is made from a multi-layered cotton gauze filter with a rubber base and metal top, the quality from the overall fit and finish is perfect.About the feeling of use - Perfect sized air filter for those custom air filter installations or even fitting directly onto the throttle body if the space allows. A one off purchase for an air filter that wil last the life of the motorcycle, during my ownership anyway.Products to buy together - Another product to purchase when looking to further increase the performance on the Grom would be a lightweight flywheel, which allows for an increased throttle response.Difficulty of installation - The installation of the round taper type air filter is a simple task that took 0.7 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to gain aceess, remove the original air intake and secure the round taper type air filter to the new larger inlet tube.Cost performance and comparison with other products - I find the cost of all the products K&N sell to be high when compared to what most other companies sell their products for and the round taper type air filter is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the round taper type air filter, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The master cylinder guard from SP Takegawa is made from billet aluminium with precision machining and a silver anodized surface finish while the quality from the overall fit and finish is perfect.About the feeling of use - The wonderful design and finish of the master cylinder guard does wonders increasing the appeal of the Monkey 125 by covering the original plain and less then ideal master cylinder from Honda.Products to buy together - A key product to purchase to further increase the appeal of the Monkey 125 by the removal of more of the original parts, would be the noticably large front fork guards that are available in a slimmer aluminium finish from a few aftermarket suppliers.Difficulty of installation - The installation of the master cylinder guard is a simple task that took 0.1 of an hour to complete. common sense and the use of basic hand tools is all that is required to secure the guard onto the master cylinder.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the master cylinder guard is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the master cylinder guard, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very basic.View Detail

About quality and texture - The ram air intake kit from Brock's is made from a dry multi-layered water proof gauze filter with an aluminium elbow with a breather hose fitting and temperature sensor fitting, the quality from the overall fit and finish is perfect.About the feeling of use - Simple in it's design which offers performance gains in a compact package while improving the overall appearance. The positioning of this ram air intake is perfect for allowing the addition of performace parts like oil cooler and catch can.Products to buy together - Another product to purchase when looking to further increase the performance on the Monkey 125 would be a full exhaust system, which together will allow for a freer flowing engine.Difficulty of installation - The installation of the ram air intake kit is a simple task that took 0.7 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to gain aceess, remove the original air box and secure the air filter kit to the throttle body.Cost performance and comparison with other products - I find the cost of all the products Brock's sell to be priced high when compared to what most other companies sell their products for and the ram air intake kit is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the ram air intake kit, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The G Series twin shocks from YSS are made from machined billet aluminium featuring an all black anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - This rear suspension features a spring rate that is specific for a weight range which makes it simple to choose from the two options available. Obviously way better then the original units with there heavier rated springs, preload adjusting collars, rebound adjusters and the looks when fitted to any of the coloured Monkey 125 give that custom appearance.Products to buy together - The suspension on the Monkey 125 would have to be the worst part of this mini moto, so after the purchasing of this quality rear suspension the essential product to purchase to complete your suspension upgrade would be the G-Craft - YSS fork upgrade kit that can also be purchased here on Webike.Difficulty of installation - The installation of the twin shocks is a simple task that took 0.5 of an hour to complete. Mechanical aptitude and the use of basic hand tools is what is required to secure the rear suspension between the frame and the swingarm.Cost performance and comparison with other products - I find the cost of all the products YSS sell to be on par when compared to what most other companies sell their products for and the twin shocks are no different.About shipping and packaging - With there being no option for sea freight or EMS for the twin shocks, I had to chose FEDEX economy plus which is reasonably priced and fast. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail