25.54 EUR
(4,163 JPY)
5 (9 Reviews)
Excellent
OEMMagnet PullerIt's an OEM tool and I had no problems working with it.
Reviews For YAMAHA YAMAHA OEM Magnet Puller From Other Webike User
Excellent
As expected, OEM Product[How is it used?
TZr250R (3XV) I used it to remove the Flywheel from the generator in
There are cheaper MagnetPullers made in China, but I chose this product because it is an OEM Product, which is mentioned in the service manual.
Was the one you received as per Image?
As you can see in the picture, it came in a bag that looks like an automotive tool bag.
I would have preferred a box because I'm sure it will sleep in the toolbox for a while after one use, but oh well, it doesn't matter to the function.
How was your experience with it?
TZr250R (3XV) I used it after removing the Nut from the Center, following the service manual for
When I turned it with MONKEY Wrench and Glasses Wrench as shown in the picture, I was able to loosen it quickly. That's OEM Product.
I think that the frequency of use is not a lot, but if it is this easy to use for less than 2,000 yen, it is good.
[Points to note]
The Handlebar that comes with it will probably be too much for this part as it requires a good amount of Torque.
If you are a person who roses Engine, I think you have Glasses Wrench, so it is safe to work with it.
How did it compare to other products?
Although I did not compare directly, I thought a little whether I would use MagnetPuller of unknown Chinese Manufacturer.
However, I decided to go with the OEM Product, which was the right decision, because the Chinese products in these tools have a lot of "hagap".
【Review】
I was able to remove the Flywheel from the generator in just a few minutes for the first time.
If you want to work with ease, choose an OEM Product.View Detail
Excellent
It's easy to use!1KT (TZr250) I used it in the I used the Universal Product one before, but it didn't come off well and the tool lost, so I bought the OEM Product. It was easy to use and came off easily with the OEM tool.View Detail
Excellent
OEM tools for peace of mindOEM tool with low price and reliable.
There is a similar tool made in C country, but the price is not so different and the reliability is much different, so there is no Merit to challenge.
I think it's a safe choice as long as you don't make a mistake about the type of car it fits and how to use it.View Detail
Excellent
OEM tools, after allI used to use a cheap cross-type universal puller from CHINA
I couldn't get the Flywheel out of the Universal Puller, so I had to try it out I bought the OEM tool and it came off easily
It is easy to apply force because it can be held in the mouth by a large tool
I wasted a lot of time worrying about not being able to take itView Detail
Excellent
YAMAHAYamahaY's Gear YAMAHA OEM Magnet PullerYAMAHAYamahaY's Gear is YAMAHA OEM Magnet Puller. TZr250 (1KT) I used it to remove the Magnet rotor. Screwed in the magnet rotor and turned, it was easy to disengage with a buzzing sound. This is a good one. I think that it was good to purchase.
View Detail
Most Viewed Reviews Of YAMAHA Pullers
Excellent
Must needed tool when removing the TW Flywheelbought this OEM bolt when I needed to do work on my tdub engine.TDUB ,The flywheel is mounted onto the tapered end of the crankshaft. It is secured from rotating with a Woodruff key, and is tightened down by a bolt that threads into the end of the crankshaft. To remove the flywheel, you must first remove this bolt, The next step is to thread a bolt ( THAT'S WHAT THIS OEM BOLT ABOUT ,CALLED OEM ROTOR PULLER OR FLYWHEEL PULLER) into the internal threads of the flywheel.The TW's rear axle is the correct thread and can be use to do this also BUT I don't want to take any risk and buy a YAMAHA OEM BOLT ,THAT DESIGN TO DO THE JOB WITHOUT HESITATION.As this bolt is tightened, the flywheel will be pulled free from the tapered crankshaft. All threads are standard right hand threads . Then secure the flywheel from turning and then try to remove the Flywheel bolt first Then you should be able to use a proper sized bolt/flywheel puller to get the the flywheel to pop free. The proper thread size needed is 16mm x 1.5 RH . as usual package received very quickly after dispatch from japan. quality packaging and quality service .thank you WEBIKE. Highly Recommend Online shop. 5StarView Detail
Excellent
As expected, OEM Product[How is it used?
TZr250R (3XV) I used it to remove the Flywheel from the generator in
There are cheaper MagnetPullers made in China, but I chose this product because it is an OEM Product, which is mentioned in the service manual.
Was the one you received as per Image?
As you can see in the picture, it came in a bag that looks like an automotive tool bag.
I would have preferred a box because I'm sure it will sleep in the toolbox for a while after one use, but oh well, it doesn't matter to the function.
How was your experience with it?
TZr250R (3XV) I used it after removing the Nut from the Center, following the service manual for
When I turned it with MONKEY Wrench and Glasses Wrench as shown in the picture, I was able to loosen it quickly. That's OEM Product.
I think that the frequency of use is not a lot, but if it is this easy to use for less than 2,000 yen, it is good.
[Points to note]
The Handlebar that comes with it will probably be too much for this part as it requires a good amount of Torque.
If you are a person who roses Engine, I think you have Glasses Wrench, so it is safe to work with it.
How did it compare to other products?
Although I did not compare directly, I thought a little whether I would use MagnetPuller of unknown Chinese Manufacturer.
However, I decided to go with the OEM Product, which was the right decision, because the Chinese products in these tools have a lot of "hagap".
【Review】
I was able to remove the Flywheel from the generator in just a few minutes for the first time.
If you want to work with ease, choose an OEM Product.View Detail
Excellent
It's easy to use!1KT (TZr250) I used it in the I used the Universal Product one before, but it didn't come off well and the tool lost, so I bought the OEM Product. It was easy to use and came off easily with the OEM tool.View Detail
Excellent
OEM tools for peace of mindOEM tool with low price and reliable.
There is a similar tool made in C country, but the price is not so different and the reliability is much different, so there is no Merit to challenge.
I think it's a safe choice as long as you don't make a mistake about the type of car it fits and how to use it.View Detail
Excellent
OEM tools, after allI used to use a cheap cross-type universal puller from CHINA
I couldn't get the Flywheel out of the Universal Puller, so I had to try it out I bought the OEM tool and it came off easily
It is easy to apply force because it can be held in the mouth by a large tool
I wasted a lot of time worrying about not being able to take itView Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING