A company in the US called DRIVEN seems to be a sponsor of the MOTARDTeam! But it's not just Mini bikes such as the Grom and Z125, it's also the middle class We have developed and sold a variety of dress-up and functional parts, including a motorcycle. It looks like a manufacturer, and if you look at their home web site, they have quite a variety of parts available! It's not MAJOR in Japan, and it takes a long time to get it, so I'm not very proactive. I don't think the Manufacturer would choose to
I chose this Sprocket guard because I couldn't find anything else that was better. I've posted a lot of pictures of it, so you can see if you look at them, but first of all, the Grom Black Material:Plastic's Sprocket guard is a very nondescript and cheap thing. It doesn't have any surface treatment, so it's already got a lot of fine scratches from being rubbed by Boots and has lost its luster. This is a plastic part. I would like to change this part which is known to be plastic at a glance, but for some reason it is a FOR PartsManufacturer of the JAPAN MODEL is not very active in the development The same shape Material as OEM:CarbonGuard is produced by TYGA PERFORMANCE in Thailand. And this DRIVEN Material:I was torn between AluminumGuard. The deciding factor was the choice of Gold alumite. However, there was a Large problem with the other parts of the same DRIVEN that I ordered separately. (It's not a very gold color tone). I'll have a report on that part in the near future, but because of those problems ( (By the way, that problem has been solved! I was worried about this part until it arrived. Also, the shape of this Guard is so different from the OEM, so I'm not sure how on earth It's hard to imagine what it would look like to install it, isn't it? I looked for images of the grom, but I couldn't find any (only 1pc. was available). The web of DRIVEN itself has only a picture of the part Single Body, and the installation Image of There is no offer. Thank you, the overseas manufacturers are still Japan's manufacturers It's not as kind as it sounds. You have to be prepared for that sort of thing beforehand, but I'm happy to find a good part, and yes I'm looking forward to introducing parts that can't be found anywhere else to my motorcycle. It is.
I was relieved to find that the parts I received were almost exactly what I expected. The color tone is a little more yellowish than the other Gold parts, but it's bright enough and Because the processing is also beautiful, it is sufficiently high quality if it sees it in a part Single Body. The price is also respectable, so of course it's to be expected. So, I installed it through the special collar with the plate screw bolts that are supplied with it. It is secured using the Screw hole that the OEM Guard came with. So, installation is basically simple, the screw holes are in the Offset position. It fits the OEM position just right. As you can see in the Image after it's installed, this oddly shaped Guard is brilliant. It becomes like fitting to Motorcycle. I think it's quite an excellent design.
When I removed the OEMGuard, it was so dirty inside with gold dust and chain oil. I used Chain cleaner to carefully clean it on this occasion. After cleaning, of course, I put on the Chain lube. Then, the curved C-shaped plate of the genus Gold that is inset into the OEM Guard ( (Chain Guard) and carefully clean it with this DRIVENSprocket. Co-tighten it to the The plate screw used for installation is a heavy M8 screw, but it is a 4mm Hexagonal So there is a high risk of licking it when you torqued it. Be careful, I know it's a design reason, but the M8 Cap Bolt that uses 6mm It is safer to do so.
The finished product is as you can see. The vibe is so different, it's a mechanical beauty! I like it very much. After all, there is a lot of Garbage around the sprocket, so you need to take it off and wash it sometimes. I think there is. It may be a bit Large strange to keep it clean.
If you see this picture and think it's a good idea, you can install it with no problem, so I think you should definitely consider it. It's a bit expensive and you'll have to wait for it to arrive in about 3 weeks. It's a bit expensive, though, and you'll have to wait about 3 weeks for it to arrive. It comes in a variety of colors, so you can match it to your motorcycle's color. I think it's a good idea to Coordinates.
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING