94.24 EUR
(15,359 JPY)
1 (1 Reviews)
rating breakdown
5 Stars |
|
0 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
1 |
Average
How's that sound?CB1300SF (NC40) I've been wanting one for a while, but it was on sale, so I snapped it up
The installation was not so large as I thought, and it was possible to install easily However, the Handlebar End of the Access side of the slot does not return In the state of affairs, I had to bite into a thin Washer to open the gap I turned the temperature up to the max and the Winter Gloves will be nice and warm! 。
Reviews For EFFEX Grip Heater Switch Integrated Type From Other Webike User
Terrible
Defective and lousy manufacturer responseIt was an initial defective product.
I asked the motorcycle shop to bring in the installation, but the shop checked the operation according to the manual operation check procedure, but it did not work properly.
It took me quite a while to isolate whether this was a poor method of operation verification or a defective product, and I was asked to pay for the labor for it.
I don't want it to be there, but it's a human thing to do, so initial failure is inevitable.
Regardless of the merits of this labor claim, I told the manufacturer through the dealership that this had happened.
No apology for shipping defective products.
He misunderstood what we wrote and made accusations against us.
Aftermarket parts are just like that.
Honestly, what is this? The answer was.
By the way, we have not made any requests for gold items from us.
If you have to use this manufacturer's product, there is no choice but to use it, but if not, KIJIMA etc. also offers similar products, so we recommend you to consider them first.
This Manufacturer's attitude was so bad that it made me feel that way.View Detail
Most Viewed Reviews Of EFFEX Heated Grips
Terrible
Defective and lousy manufacturer responseIt was an initial defective product.
I asked the motorcycle shop to bring in the installation, but the shop checked the operation according to the manual operation check procedure, but it did not work properly.
It took me quite a while to isolate whether this was a poor method of operation verification or a defective product, and I was asked to pay for the labor for it.
I don't want it to be there, but it's a human thing to do, so initial failure is inevitable.
Regardless of the merits of this labor claim, I told the manufacturer through the dealership that this had happened.
No apology for shipping defective products.
He misunderstood what we wrote and made accusations against us.
Aftermarket parts are just like that.
Honestly, what is this? The answer was.
By the way, we have not made any requests for gold items from us.
If you have to use this manufacturer's product, there is no choice but to use it, but if not, KIJIMA etc. also offers similar products, so we recommend you to consider them first.
This Manufacturer's attitude was so bad that it made me feel that way.View Detail
Excellent
Stylish and niceI bought it for my TW200's winter equipment
The installation was a bit tight, as is typical for this type of product
I struggled, especially on the Right Side where there is a Throttle cone, but it's just fine I inserted it by tapping it gently with Size's Socket
I took power from the Battery as per the Instruction Manual It's called "bacchanal"
When the voltage drops to a certain degree, the system automatically turns off the power and protects the battery It is
The Indicator will blink to let you know when there is a voltage drop
In fact, the TW200 has a low Battery capacity and does not generate a lot of power, so at its strongest, the longest point is in the middle of winter It was blinking at traffic lights and such
If you're driving normally, it's perfectly fine, and it's not this product's fault
It was somewhat improved when the headlights and tail lamps were converted to LED, so I thought it was a problem caused by the vehicle I think
As for use, there's a big difference between having it and not having it, it's the moon and the swoon, the whale and the mincemeat
KIJIMA also has one with almost the same specifications, but the feel of the grip is It felt almost the same
I opted for the EFFEX that doesn't look like anyone else, but it's engraved on the Grip as EFFEX You may not like it
However, the Grip heater in general can be said to have a Handlebar Cover or at least It is recommended to use with Knuckle guard for wind protection
At its strongest, no matter how warm your palms are, they are taken from the back of your hands, so cold things are cold
View Detail
Very Good
It's a winter essentialIt's a must-have safety precaution during the cold months
With 5 temperature settings, you can adjust it according to the gloves used and the temperature
Refreshingly, you can also ride around the Handlebar with the Switch in one piece, and the opportunity and distance to ride There will be many
The only disappointment is that the end adjustment floats a bit, but it's not a problem to use, so GoodView Detail
Very Good
Performance as good as OEMsIt was installed in CB1100SC65
I was replacing the OEMHandlebar with EFFEX, so the same Manufacturer I chose the
Because it's a naked motorcycle, I chose the switch integrated into the handlebar and made the handlebar area I let it be Refreshing
It would be easier if I had an Air to remove the OEM Grip, but I don't have one, so I don't have a 556 Nozzle
I plunged it between the Grip and poured lubricant into it and removed it
Moreover, if you put three aluminum spacers attached to Axel without processing, you can use it Exactly I entered with
The power switch is in front of the blinker, which makes it less easy to operate
Next time, I would like to rework it to a position where it won't interfere with the operation of the uni car
I used it in conjunction with RSThailand's electric heat Gloves (Battery type) however
The heat from the Grip heater on the inside of my hand and the warmth of the electric heat Gloves on the back of my hand were perfect
There will be more opportunities to ride motorcycles in the middle of winter
I wish I had bought it soonerView Detail
Very Good
I can't bear to cut the OEMGripI tried a cheap, wrap-around Grip heater and I couldn't go back to not having a heater So I bought this one
It's nice to have warm hands
It's a SEA BASS car, so I had to modify the Axel side of the car, so cutting the grip was a bit of a chore It was sad
Rib was shaved with Grinder
It's just that when you stick it into the Handlebar, the glue that comes with it makes it harden in the middle of sticking
It came with a bonding moment like a jelly-like moment!
I'd rather use regular glue to attach it
Wiring of Controller is too hard and cannot be handled as you want, it is also a Minus point
Grip is a little bit thicker, but I'm happy with it
View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING