I think it is a little lighter than the OEM Rotor because it has been padded out
I think it's more affordable than the OEM Rotor because it's cheaper and looks better than the Parenthesis It is
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
I think it is a little lighter than the OEM Rotor because it has been padded out
I think it's more affordable than the OEM Rotor because it's cheaper and looks better than the Parenthesis It is
Delivery is fast & easy.Nice packaging.Nice design.Value for $$$.Very happy with this purchase :)Will recommend to friends too.View Detail
Fits: YAMAHA Cerro 250 05-15, YAMAHA CELLOW 225 85-04, YAMAHA tricker 04-15, YAMAHA XT250X 06-15
We had no complaints with the OEM Product, but since the car had been driven 46,000km since new, we replaced the Disc Rotor while replacing the Chain/Sprocket.
The price is not so different from the OEM product if you aim for the sale period. The so-called "PAY BARRELDISC" looks like "Race ish", but I am not sure if it is suitable for SEROW or not. (My opinion).
The effectiveness of the Brake itself is not a replacement for the OEM, but I feel that the Control has been improved.
However, at the same time, Brake Pads were also replaced, so it is not possible to say that the Disc RotorSingle Body improves control.
The replacement work is not particularly difficult, but since screw lock is applied to the mounting bolt, there is a possibility that the hexagonal hole may be nipped, depending on the accuracy of the tool and how it is used.
Since the mounting bolt is a part that is rarely touched, it may have quite a bit of rust, so we recommend replacing it with a new one (OEM, of course).
Since this is an important part of the Brake, we recommend that those who have even the slightest concern about it request work to be done by Shopetc.
After a short interval, we also replaced the front disc rotors with this product, which seems to work a little better.
However, I don't know if the Disc RotorSingle Body improves the braking effect, since the Brake Pads were also replaced at the same time as the Rear.
In conclusion, I think this is a good product, with no large difference from the OEM in price, and with performance equivalent to or better than the OEM.View Detail
Fits: KAWASAKI KLX250 08-16, KAWASAKI KLX250SR 08-16, KAWASAKI D Tracker X 08-16
I bought this for my KLX250 SpareWheel, and I can't tell the difference between the Brake Fee Ring and the OEM one.
I really like it because it looks parenthesis good.View Detail
Fits: KAWASAKI KDX200SR 90-93, SUZUKI 250SB 02-06, KAWASAKI KLX250SR 98-07, KAWASAKI KLX250SR 93-97, KAWASAKI KLX250SR 08-16
[How is it used?
D Tracker for Off-roadSpec. (KLXification) Used for the following purposes.
Applications:Enduro racing, Off-road driving
Was the one you received as per Image?
As per the image, cheaper than OEM Product and looks good in Parenthesis.
It also has a lot of holes in it, so it seems to dissipate heat well.
Was the installation difficult?
First, the OEMBrake rotor is a pain to remove, so I'll describe the hang.
Scorch the mounting bolt with a burner, etc., so that the screw locking agent can be removed.
After that, spray the bolts with lubricant such as Raspene. It makes it easier to loosen.
Hexagonal Socket+Spinner Handlebar with high accuracy (Breaker bar) to loosen Bolt.
If the head of the bolt is licked, use a hammer and graver or a penetrating screwdriver to loosen the bolt.
For installation, it is preferable to use a torque wrench to control the torque.
How was your experience with it?
In off-road driving, I had a chance to drive in both dry and muddy conditions, and the control was as good as in either case. Muddy condition (Enduro race) There wasn't much mud, and there was no trouble.
Although I did not always use it on public roads, I recommend this product over the OEM because the change from OEM will improve the appearance of the parenthesis and the control is comparable.
Also, when replacing the brake rotor, it is recommended to change the brake pads to new ones as well, as it will affect the beauty of the brake.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
[ITEMS TO BUY TOGETHER
Brake rotorMounting Bolt (OEM is preferred)
Burner
lubricant (Raspene is the strongest)
Spinner Handlebar (Breaker bar)
Ratchet
Hexagonal Socket (Preferably with good accuracy from a proper tool manufacturer)
Brake PadsView Detail
Fits: SUZUKI Jebel 250 96-00, SUZUKI Jebel 250XC 96-00, SUZUKI DR-Z400S 00-09, SUZUKI RMX250 89-98, YAMAHA YZ125 02-21
The Brake Pads were so low that they attacked the Rotor quite a bit and had to be replaced.
I could have gone with OEMRotor, but this product had a modern Design and was reasonably priced, so I decided to give it a try.
Also, the fact that it was highly rated by other people's impressions helped me to make my decision.
I've only done less than 100k miles since the replacement, but the original Brake was tired, so it feels like it works and Touches well.
Even if Life is a little shorter, it's not that expensive, so if I'm not dissatisfied with the performance, I feel like I'll put this product on again next time.View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING