It's not a bad thing
posted Feb 24, 2019
By
Japan User(translated) (195194)
From
I received the product and installed it as soon as I got it and ran it Saturday and Sunday
I think it works well enough as a DriveRecorder
Automatic recording starts when the key is on When the key is off, recording continues for 5 seconds and then ends
As for the joint of File in Loop photography, the image is duplicated in File before and after about a little less than 1 second So, the important scene becomes the joint of File, and there is no thing that it was not taken
The GSensor is not described in the Instruction Manual, but it is also included in the The sensor sensitivity can also be adjusted with the menu File that contains the image part that detects the vibration is preserved in another folder, and is excluded from the deletion object
As for the picture quality, as for the impression whether it is not bad, personally It's 9.6 Mbps, so it's not particularly high on the numbers, but it's not that low either And it looks like
No useful features, no GPS, so check occasionally to make sure the date and time are not out of sync You must do this
Since the body is non-Waterproof, it will be installed under Seat There is no REMOTE CONTROLLER with Indicator, so it works properly and is not a good idea to use it You can only judge whether it is or not by listening to the recorder-starting sound when the key is turned on
However, the absence of the above-mentioned function means that Wiring and others that must be dealt with are Because it is only Camera and power supply, it can be said that the part is easy So you can take out the Body and operate it with the Buttons
You can only use the CameraMount that comes with it, and you cannot use a GoPro mount for it So, you may be troubled by the installation However, because I feel it is a little smaller than the other companies' products, I think it is a good choice If you can install it neatly, the retrofit feeling will be softened a little...maybe I couldn't do it for me
I have not used the motion detection function because it is not recommended to use it This product does not support the West Japan LED signal
It is a Memory card, but the use of 128GB was impossible with the one on hand When Format is done, it is recognized, but it is Formatted by FAT32 When you continue to use it as it is, after a while, the indication of the error comes out, and the image is not recorded whatsoever As recommended, I think that it is good to use MicroSDHC of 32GB
Other companies' products with all of the above useful functions (except for the motion detection function) are in the mid 20,000 yen range, and those without them are 20,000 yen Considering that it can be purchased at less than 26,000 yen including tax, 26,000 yen is felt high However, because the function of DriveRecorder- is enough, I bought it, but I cannot use it I don't think there is any such thing
That's all Reference
I think it works well enough as a DriveRecorder
Automatic recording starts when the key is on When the key is off, recording continues for 5 seconds and then ends
As for the joint of File in Loop photography, the image is duplicated in File before and after about a little less than 1 second So, the important scene becomes the joint of File, and there is no thing that it was not taken
The GSensor is not described in the Instruction Manual, but it is also included in the The sensor sensitivity can also be adjusted with the menu File that contains the image part that detects the vibration is preserved in another folder, and is excluded from the deletion object
As for the picture quality, as for the impression whether it is not bad, personally It's 9.6 Mbps, so it's not particularly high on the numbers, but it's not that low either And it looks like
No useful features, no GPS, so check occasionally to make sure the date and time are not out of sync You must do this
Since the body is non-Waterproof, it will be installed under Seat There is no REMOTE CONTROLLER with Indicator, so it works properly and is not a good idea to use it You can only judge whether it is or not by listening to the recorder-starting sound when the key is turned on
However, the absence of the above-mentioned function means that Wiring and others that must be dealt with are Because it is only Camera and power supply, it can be said that the part is easy So you can take out the Body and operate it with the Buttons
You can only use the CameraMount that comes with it, and you cannot use a GoPro mount for it So, you may be troubled by the installation However, because I feel it is a little smaller than the other companies' products, I think it is a good choice If you can install it neatly, the retrofit feeling will be softened a little...maybe I couldn't do it for me
I have not used the motion detection function because it is not recommended to use it This product does not support the West Japan LED signal
It is a Memory card, but the use of 128GB was impossible with the one on hand When Format is done, it is recognized, but it is Formatted by FAT32 When you continue to use it as it is, after a while, the indication of the error comes out, and the image is not recorded whatsoever As recommended, I think that it is good to use MicroSDHC of 32GB
Other companies' products with all of the above useful functions (except for the motion detection function) are in the mid 20,000 yen range, and those without them are 20,000 yen Considering that it can be purchased at less than 26,000 yen including tax, 26,000 yen is felt high However, because the function of DriveRecorder- is enough, I bought it, but I cannot use it I don't think there is any such thing
That's all Reference
- Was the one you received as per Image?Shell has Inner Visor, so it's very Large.[How did you feel about the Fit?I have a round face and obese body.What are the specifications of the product?The fog fr...Read More
- The NORMAL is soft and comfortable to ride, but it feels a bit wobbly and scary at a high pace, so I changed it. Thanks to the tightened suspension, the sense of stability increased and it became easy...Read More
Fits:- HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service) MD50 [Genuine part number] 33702-077-671 [Model name] MD505 [type] J/2J/3J/4J
- HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service) MD90 [Genuine part number] 33702-077-671 [Model name] MD90P/MD90V [type] 1/1P/1S/2/2P/2S/J/2J/3J
- HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service) MD90 [Genuine part number] 33702-077-671 [Model name] MD90X/MD903 [type] J/2J/3J/4J/5J/6J
- HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service) MD90 [Genuine part number] 33702-077-671 [Model name] MD90A
- HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service) MD50 [Genuine part number] 33702-077-671 [Model name] MD50A
- ...and more.
I bought this as a replacement for my OEM Tail lamp cover that was cracked and faded. I was able to install it without any problems and it doesn't look out of place at all. It looks great and tightens...Read More- I bought this for my motorcycle for street riding only. The fit is good and it's easy to put on and take off.Read More
- Fits:
- HONDA SUPER CUB 90 HA02
Nostalgic RPM, this is the only reason I bought it. It's easy to install, the appearance is a little more sporty than normal, and the sound is fun. And above all, the RPM sticker alone makes me feel g...Read More
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING