This product has been removed or currently not available.
Excellent
I am satisfied.◎ MICHELINMICHELIN : COMMANDER II [130 / 90B16 M / C 73H REINF TL / TT】 Helmet Commander 2 Front tire installation - Running
Base car is HarleyFLST-C 1992 formula which is open to my motorcycle.
It is exchange use to Front. Previous Thailand is DURO 【510-16】 was. This time it is Asia, but I bought it because I have worn the confidence of Michelin Brand and Helmet Commander before.
As far as seeing the goods, Rubber quality is well built and it is solid and Glue Bing is clear.. I feel that it is slightly thinner than the previous Helmet Commander. The price is quite affordable.
However, compared to the previous DURO I feel that I feel a considerable weight gain - -
Please take care to avoid shifting the center of Shim so please remove Axle Shaft as it is TaperBearing using Shim for desorption. Because it is an old iron Rim, rusty berries and rim Band every time of exchange - Tube exchange is important. The part of the wire that belongs to Rim was solid and when I put Air, the ear rose on average on the whole.
For cheap reasons Mustache has also been removed securely.
After incorporating Axle Shaft stab and hand it to a horse Even if I release my hand I installed a weight for stopping anywhere and I got balance and I got 250 kpa of Tire pressure. Pay attention to Shim and insert Axle Shaft (81-88 Nm) Tighten with.
I tried riding on the car body. Because the cross section is vertically long, there is somewhat a break feeling but straight running stability - Both corner rings are the best fees Ring.
"Required tools etc etc. "◎ New Tire tube ◎ Wire brush ◎ Rim Band ◎ Molybdenum grease ◎ Rust preventive Paint ◎ Torque wrench ◎ 1 / 2-inchesGlasses - 17mm piece
Large It is cheap, it is recommended with very good products.
? Please check the direction of rotation with the arrow on the Side wall part.
I ran about 2,000 km but the durability seems to be good.
It is very cheap and good product, so it is recommended.
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING