full of electrical charges (Lol)
Grip heater
Fog Lamp
JupiterNavigation
USB power supply
Digital meter
Other.
Maybe we can save a little electricity. (^_^;)
18.47 EUR (3,190 JPY)
Webike Point: +32 pt
(0.18 EUR)
Delivery Information
Temporarily out of stock.
Restock around 24th Jul. 2025
FITMENT
HONDA
Open Fit Model Information Table
-
Universal
Other information]Other vehicles that meet the conditions for using Wedge T20.
-
LITTLE CUB
C50-4400001 and later
-
LITTLE CUB
C50-4500001 and later
-
LITTLE CUB
AA01-3000001 to 33999999
See all
HONDA
Product detail
Tail valve: 12V 10/5W 18/5W 21/5W
Socket shape: Wedge T20 with the positional relationship of each terminal as seen from the rear of the bulb as shown in the figure (note that unlike incandescent bulbs, each terminal has polarity.)
**There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change..
*Super Cub 50 Custom,Super Cub 50 (FI) (AA01-1700001 or later),Little Cub (FI) (AA01-4000001 or later),Gyro Canopy Injection models cannot be installed.
*This product cannot be used with clear tail lens. (Cannot be installed at the same time as SP Takegawa's Clear Tail Lens Kit for Cygnus X)
*The LED bulb may be damaged by vibration when installed in a vehicle with a custom engine that is subject to more vibration than a normal vehicle.Do not use in vehicles with high vibration.
SP Takegawa's web catalog is here
(*This information is current as of December 1, 2012.Please note that there may be some changes in specifications and prices.)
.
■It is the LED bulb kit that can change to the LED tail by only exchanging with the stock tail valve.The LED bulb eliminates the risk of bulb breakage and emits bright and vivid light, which improves visibility and contributes to safety.In addition, since the power consumption is lower than that of a general valve, the load on the electrical system can be reduced.
■The LED bulb has a built-in white LED for license plate illumination.
■There are two types of valves, "BAY15D" and "Wedge T20", and they can be used for various vehicles if the wattage of each type, the shape of the mouthpiece and the position of each pin are suitable.Please be sure to check the installation conditions before purchasing.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA GYRO CANOPY , HONDA SUPER CUB 50 12V AA01-1000001 or later, HONDA SUPER CUB 50 12V AA01-1500001 to 1699999, HONDA SUPER CUB 50 12V C50-0200001 to 0327464, HONDA SUPER CUB 50 12V C50-0400001 to 0573585
Jul 18, 2022
Helpful?
Fits:HONDA GYRO CANOPY , HONDA SUPER CUB 50 12V AA01-1000001 or later, HONDA SUPER CUB 50 12V AA01-1500001 to 1699999, HONDA SUPER CUB 50 12V C50-0200001 to 0327464, HONDA SUPER CUB 50 12V C50-0400001 to 0573585
Installed on: HONDA SUPER CUB 50 (C50)
Nov 12, 2021
To Our Safety Riding, Bright the Light!
ENG: This is most easy way to your bike Bright Tail light bulb why dont you try this more Bright then original bulb, more anti biverate worry, and less use voltagebe advice... if you install this bulb and test the stop swith from right handle lever and foot brake pedal, if its not working, try up-side-down install then its working i was embarrassed ... haha KOR: 타케가와 LED 전구입니다 정 중앙에 3발은 적색, 그외 옆에 달린 LED들은 백색입니다 어차피 테일등 자체가 빨간색 이기에 밝은 빨간 불빛을 보여주기는 합니다만, 사이의 백색광 덕분에 번호판 등 역할겸 매우 밝습니다 그리고 조립시에 브레이크등이 작동하지 않을경우 180도 돌려서 다시 장착해보세요 그러면 작동할겁니다 아마 극성이 있는듯 하네요 일반적인 할로겐 전구의 필라멘트가 오토바이 진동으로 인해서 끊어질 렴려도 없고 내구성은 좀더 타봐야 알겠지만 오래 갈 것이라 믿습니다 왜냐면 MADE IN JAPAN 이니까요
View DetailHelpful?
Fits:HONDA GYRO CANOPY , HONDA SUPER CUB 50 12V AA01-1000001 or later, HONDA SUPER CUB 50 12V AA01-1500001 to 1699999, HONDA SUPER CUB 50 12V C50-0200001 to 0327464, HONDA SUPER CUB 50 12V C50-0400001 to 0573585
Jul 12, 2021
I replaced the Stop-lamp on my 2004 LITTLE CUBCarburetor Vehicles.
When I noticed that the Position was not lighting up, I had a Motorcycle shop look at it and they said that there is a difference between AC and DC, so just replacing it will not light up the Position.
I asked him to tweak the Wiring around the Battery and it lights up fine.
The length of the Lamp insert is too long, so it doesn't fit the Snap and I was worried that it might come off wobbly.
If you stick it with Vinyl Tape or leave it as it is and a problem comes out, if you replace the insertion port of the LITTLE CUB side, it will be Large durable.
I think it's a bit dark, but I'm no longer worried about the ball breaking, so we'll see.
Helpful?
Fits:HONDA GYRO CANOPY , HONDA SUPER CUB 50 12V AA01-1000001 or later, HONDA SUPER CUB 50 12V AA01-1500001 to 1699999, HONDA SUPER CUB 50 12V C50-0200001 to 0327464, HONDA SUPER CUB 50 12V C50-0400001 to 0573585
Nov 7, 2020
I used it on my '11 SUPER CUB110 (JA07). It's very convenient to replace the LEDs with LEDs, because they have a super long life against Halogen.
View DetailHelpful?
Fits:HONDA GYRO CANOPY , HONDA SUPER CUB 50 12V AA01-1000001 or later, HONDA SUPER CUB 50 12V AA01-1500001 to 1699999, HONDA SUPER CUB 50 12V C50-0200001 to 0327464, HONDA SUPER CUB 50 12V C50-0400001 to 0573585
Oct 5, 2020
When replacing a broken Tail Lamp Bulb on a LITTLE CUB
Purchased and used.
At a price that is many times more expensive for an LED bulb than a regular bulb
Yes, but the Tail/Brake bulb is out.
It may be difficult to notice that the KIP is poorly maintained and
It's boring to be cut off, so I bought the peace of mind.
Easy to install because it is only exchanged with the NORMAL bulb.
It is
Visibility is also improved because the color comes out brightly with "HADRILL
I'm sure you do.
Helpful?
New Custom Articles
