I'm using honda hornet 250DX.This is a late verson of manufacture.Im looking for changing chrome silencer bend which is use in hornet early verson.but unfutunatly early verson crome silencer bend doesn't include with catalizer.Finally i found this in webike and this will perfectly fitted in to the middle of silencer which is rich to exhaust temperture +300C above.Qulity of outex catalize is very solid and serial number and brcode will print on outside of wall.After using catalizer, earlier engine thin sound(without catalizer with silencer bend) will desapire and smell of gasoline will reduce.Even reduce air polution too.This Ctalizer i will recomnder for motocycle enthusist
View Detail44.8 ~ EUR (7,737 JPY)
Delivery Information
-
Please select product form first.
Product detail
[Size]
Outer Diameter: 33.0mm
Length: 60.0mm
Plate thickness :1.0mm
Number of starters: 100/in2
Stainless steel tapping screws (M4 x 10mm) with 6pcs (tapping fixing type only)
**Exhaust gas test report is not included in the catalyzer itself.
*The image of the insertion type is 35Φ x 100mm..
Let's clean the exhaust gas!
Just put the catalyzer between the center pipe and the silencer.
The catalyzer purifies harmful substances such as carbon monoxide (CO), hydrocarbon (HC) and nitrogen oxide (NOx) in the exhaust gas emitted from the engine by oxidation-reduction reaction and changes them into clean exhaust gas.
The catalyzer is coated with precious metals such as platinum and rhodium.
As the number of cells increases, the exhaust gas purification rate improves, but the performance is slightly affected because the ventilation resistance becomes larger.
[Catalyst specifications]
・Type and amount of supported metals: Pt / Rh=5 / 1=1.4g / l
・Material of outer cylinder and honeycomb carrier: Outer tube: SUS436L Catalyzer: 20Cr-5Al
・Outer cylinder outer diameter dimension accuracy: ±0.05mm
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.