[Material] Soft type (TPU) [Set components] ■Protective Film x 2 Set ■Accessory kit for cleaning x 1 set 1. guide sticker (sticker for temporary fixing) x 3 2. Dust Absorber (Adhesive sheet for dust removal) x 1 3. squeegee (spatula to remove air bubbles) x 1 4. wet wipes (wet sheet for cleaning) x 1 5. cleaning cloth (cloth to remove dirt and oil) x 1
*The included cleaning accessory kit comes in one set. *Long-term exposure to sunlight will accelerate the deterioration of the film. *When applying the soft type to a spherical or curved surface, it is necessary to work carefully, making sure not to wrinkle the surface. *Images are for reference only.Other models and colors are included. *There may be changes in product specifications due to the manufacturer's reasons.
Clear glossy type protective film to protect from scratches and ultraviolet rays, and to prevent dirt and deterioration. It is easy to clean without damaging the main unit of the meter panel, even if it is covered with mud or dust. Hard type (PET) and soft type (TPU) are available according to the surface shape of the meter. Designed exclusively for models, cut to the shape of the meter panel. The film comes in two sets, so you don't have to worry about mistakes.
■Hard type (PET) Adopted for meter panels with flat surface.
■Soft type (TPU) Adopted for meter panels with curved surface and 3D shape. Adheres to curved surfaces and does not peel off easily.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
두장이 한셋트로 들어있어서 처음 장착할 당시에 작은 실수로 인해 장착에 실패하고, 다행히 여유분으로 다시 시도하여 성공했습니다. 중성세제가 조금 섞인 물을 뿌려서 충분히 먼지등을 씻어내고 장착하였습니다. 햇볓에 의한 반사는 막아주지 못하여 시간이나 방향에 따라 햇볕이 반사되어 보기 힘든건 어쩔 수 없습니다만, 피팅이 잘 맞고 자잘한 먼지등으로 인한 상처로부터 잘 보호가 될거 같아 마음에 들었습니다.View Detail
I bought this product because I didn't want my meter to get scratched, so I bought the Instruction Manual, AlcoholPaper for degreasing, Quantity:1 Set of 2pcs., The spatula is enough to remove the bubbles. The CT110 HUNTER CUB Meter Bulb surface is quite difficult to remove the air bubbles.View Detail
The Film which became the base of Reverse side did not come off easily no matter how carefully and carefully I did. It is not peeled off at first by turning the Seal which is attached. After all, it wakes up with a nail and it becomes a thing to peel off, and the edge of BodyFilm is damaged inevitably. Also, the CT125 Meter is a curved surface, so the degree of difficulty is quite high, and even if I discount my clumsiness, I couldn't paste it satisfactorily with the Film which damaged the edge. In the end, I threw away both of them because the glue was left when I removed them from the Meter, and I had to damage the Meter to remove it. We recommend that you leave the work to a shop that knows how to do it, but even a PRO may not be able to remove the mount film well.View Detail
Was the one you received as per Image? As per Image, 2pcs, thin feeling of Screen Protection Seal for smartphone.
How was your experience with it? CT110 HUNTER CUB Meter is difficult to paste because of the curved surface, I was not able to remove air bubbles well!
[Points to note] Difficult to apply, especially to remove air bubbles, I was left with a few bubbles!View Detail
The Meterassy of the CT125 CT110 HUNTER CUB has a convex spherical structure of resin, which is easier to scratch than you think! So I Ordered this product!
As a matter of fact, it's only after it's scratched that I'm able to remove the scratches at the same time ω
I ordered a low cost headlight polish with Linley solvent, polished it twice, and repeated finishing with Micro fiber, and it recovered a reasonably clean feeling.
From there, as per the Manual, degreasing cleaning> temporary fasteningSeal using three temporary fastening, since there is no mist spray, Self sake splashω I filled it with water, scraped out the air bubbles with the included spatula, and somehow I'm glad I didn't make a mistake and fall into the trap of having to use a second one ω
The manual is very helpful, and the work is not so difficult if you follow the steps and do it properly. I think it's Level for 15 minutes of labor.
The CT110 HUNTER CUB is a digital meter, so it's hard to understand intuitively, so it's important to keep the meter screen visible. I think it's not a bad idea to use a protective film to prevent scratches before they happen.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!